English
Language : 

EN5366QI Datasheet, PDF (1/16 Pages) Enpirion, Inc. – 6A Voltage Mode Synchronous Buck PWM DC-DC Converter with Integrated Inductor External Output Voltage Programming
Enpirion® Power Datasheet
EN5366QI 6A PowerSoC
Voltage Mode Synchronous Buck PWM
DC-DC Converter with Integrated Inductor
External Output Voltage Programming
Description
Features
This Altera Enpirion solution is a Power System
on a chip (PowerSoC). It is specifically designed
to meet the precise voltage and fast transient
requirements of present and future high-
performance, low-power processor, DSP, FPGA,
ASIC, memory boards and system level
applications in a distributed power architecture.
Advanced circuit techniques, ultra high switching
frequency, and very advanced, high-density,
integrated circuit and proprietary inductor
technology deliver high-quality, ultra compact,
non-isolated DC-DC conversion. Operating this
converter requires as few as three external
components that include small value input and
output ceramic capacitors and a soft-start
capacitor.
The Altera Enpirion integrated inductor solution
significantly helps in low noise system design
and productivity by offering greatly simplified
board design, layout and manufacturing
requirements.
• Integrated INDUCTOR, MOSFETS, Controller
• Footprint 1/3rd that of competing solutions.
• Low Part Count: only 3 MLCC Capacitors.
• Up to 20W continuous output power.
• Low output impedance optimized for ≤ 90 nm
• Master/slave configuration for paralleling.
• 5MHz operating frequency.
• High efficiency, up to 93%.
• Wide input voltage range of 2.375V to 5.5V.
• External resistor divider output voltage select.
• Output enable pin and Power OK signal.
• Programmable soft-start time.
• Optimized for low noise/EMI design.
• Under-Voltage Lockout, Thermal Shutdown,
Output Overvoltage, Over Current, and Short
Circuit Protection
• RoHS compliant, MSL level 3, 260C reflow.
Applications
All Altera Enpirion products are RoHS compliant
and lead-free manufacturing environment
compatible.
Typical Application Circuit
VIN
47µF
1Ω PVIN VOUT
AVIN
ENABLE
XOV
PGND XFB
SS
15nF
VOUT
47µF
• Point of load regulation for low-power
processors, network processors, DSPs,
FPGAs, and ASICs
• ≤ 90 nm advanced process loads
• Notebook computers, servers, workstations
• Broadband, networking, LAN/WAN, optical
• Low voltage, distributed power architectures
with 2.5V, 3.3V or 5V rails
• DSL, STB, DVR, DTV, Industrial PC
• Ripple sensitive applications
Ordering Information
AGND PGND
Figure 1. Simple Schematic
Part Number
EN5366QI
EVB-EN5366QI
Temp Rating
(°C)
Package
-40 to +85
58-pin QFN T&R
QFN Evaluation Board
*Optimized PCB Layout file downloadable from www.altera.com/enpirion to assure first pass design success.
03817
October 11, 2013
Rev E