English
Language : 

EN5365QI Datasheet, PDF (1/18 Pages) Enpirion, Inc. – 6A Voltage Mode Synchronous Buck PWM DC-DC Converter with Integrated Inductor 3-Pin VID Output Voltage Select
Enpirion® Power Datasheet
EN5365QI 6A PowerSoC
Voltage Mode Synchronous Buck PWM
DC-DC Converter with Integrated Inductor
3-Pin VID Output Voltage Select
Description
This Altera Enpirion solution is a Power System
on a Chip (PowerSoC). It is specifically designed
to meet the precise voltage and fast transient
requirements of present and future high-
performance, low-power processor, DSP, FPGA,
ASIC, memory boards and system level
applications in a distributed power architecture.
Advanced circuit techniques, ultra high switching
frequency, and very advanced, high-density,
integrated circuit and proprietary inductor
technology deliver high-quality, ultra compact,
non-isolated DC-DC conversion. Operating this
converter requires as few as three external
components that include small value input and
output ceramic capacitors and a soft-start
capacitor.
The Altera Enpirion integrated inductor solution
significantly helps in low noise system design
and productivity by offering greatly simplified
board design, layout and manufacturing
requirements.
All Altera Enpirion products are RoHS compliant
and lead-free manufacturing environment
compatible.
Typical Application Circuit
VIN
47µF
PVIN
VS0
1Ω
VS1
AVIN
VS2
ENABLE
PGND
VSENSE
SS
VOUT
15nF
AGND PGND
VID Output
Voltage Select
47µF
VOUT
Features
• Integrated INDUCTOR, MOSFETS, Controller
• Footprint 1/3rd that of competing solutions.
• Low Part Count: only 3 MLCC Capacitors.
• Up to 20W continuous output power.
• Low output impedance optimized for ≤ 90 nm
• Master/slave configuration for paralleling.
• 5MHz operating frequency.
• High efficiency, up to 93%.
• Wide input voltage range of 2.375V to 5.5V.
• 3-pin VID output voltage select to choose one
of 7 pre-programmed Output Voltages.
• Output enable pin and Power OK signal.
• Programmable soft-start time.
• Optimized for low noise/EMI design.
• Thermal shutdown, over current, short circuit,
over-voltage and under-voltage protection.
• RoHS compliant, MSL level 3, 260C reflow.
Applications
• Point of load regulation for low-power
processors, network processors, DSPs,
FPGAs, and ASICs
• ≤ 90 nm advanced process loads
• Notebook computers, servers, workstations
• Broadband, networking, LAN/WAN, optical
• Low voltage, distributed power architectures
with 2.5V, 3.3V or 5V rails
• DSL, STB, DVR, DTV, Industrial PC
• Ripple sensitive applications
Ordering Information
Part Number
EN5365QI
EVB-EN5365QI
Temp Rating
(°C)
Package
-40 to +85
58-pin QFN T&R
QFN Evaluation Board
Figure 1. Simple Schematic
03816
1
October 11, 2013
www.altera.com/enpirion
Rev G