EN5329QI Datasheet, PDF (1/20 Pages) Altera Corporation – 2A PowerSoC Low Profile Synchronous Buck DC-DC Converter with Integrated Inductor

Enpirion^® Power Datasheet
EN5329QI 2A PowerSoC
Low Profile Synchronous Buck DC-DC
Converter with Integrated Inductor
Description
The EN5329QI is a highly integrated, low profile,
highly efficient, 2A synchronous buck power system
on a chip (PowerSoC^TM). The device features an
advance integrated inductor, integrated MOSFETs, a
PWM voltage-mode controller, and internal
compensation providing the smallest possible solution
size.
The EN5329QI is a member of the EN53x9QI family
of pin compatible and interchangeable devices. The
pin compatibility enables an easy to use scalable
family of products covering the load range from 1.5A
up to 3A in a low profile 4mm x 6mm x 1.1mm QFN
package.
The EN5329QI operates at high switching frequency
and allows for the use of tiny MLCC capacitors. It also
enables a very wide control loop bandwidth providing
excellent transient performance and reduced output
impedance. The internal compensation is designed
for unconditional stability across all operating
conditions.
Altera’s Enpirion integrated inductor solution
significantly helps to reduce noise. The complete
power converter solution enhances productivity by
offering greatly simplified board design, layout and
manufacturing requirements. Altera’s Enpirion
products are RoHS compliant and lead-free
manufacturing environment compatible.
Features
• Integrated Inductor
• Solution Footprint as Small as 50 mm²
• Low Profile, 1.1mm
• High Reliability Solution: 42,000 Years MTBF
• High Efficiency, up to 95 %
• Low Output Ripple Voltage; <5mV_P-P Typical
• 2.4 V to 5.5 V Input Voltage Range
• 2A Continuous Output Current Capability
• Pin Compatible w/ EN5319 1.5A and EN5339 3A
• Output Enable and Power OK Signal
• Under Voltage Lockout, Over Current, Short Circuit,
and Thermal Protection
• RoHS Compliant; Halogen Free; 260°C Reflow
Applications
• Applications with Low Profile Requirement such as
SSD and Embedded Computing
• SAN/NAS Accelerator Appliances
• FPGA, ASSP, PLD, ASIC, and Processors Noise
Sensitive Applications
V_IN
C_IN
22µF
1µF
100k
ENABLE POK VOUT
PVIN
TST0
TST1
EN5329QI
Ca
TST2
PGND
AVIN
VFB
AGND PGND
POK
Ra
Rb
V_OUT
C_OUT
2x 22µF
or
1x 47µF
Figure 1. Simplified Applications Circuit
100
90
80
70
60
50
40
30
20
10
0
0
Efficiency vs. Output Current
CONDITIONS
VIN = 3.3V
VOUT = 2.5V
VOUT = 1.2V
Actual Solution Size
50mm²
0.5
1
1.5
2
OUTPUT CURRENT (A)
Figure 2. Highest Efficiency in Smallest Solution Size
08326
1
December 3, 2013
www.altera.com/enpirion
Rev B