30.503 Datasheet, PDF (17/19 Pages) Altech corporation – Metric Pin Spacinga Tubular Screw Clamp

PREVIOUS
HOME
NEXT
FIND IT
PRINTED CIRCUIT
ACCESSORIES
Convenient options that facilitate wire
termination and increase wiring effi-
ciency.
KEYING INSERTS
Use KI Keying Inserts to prevent
misplugging of screw-cage clamp plugs
in adjoining headers without loss of
position. Incorrect plug installation can
cause serious electrical damage to
sensitive electronic circuits.
Type KI-AK Keying Insert is a precision
molded profile that installs into parallel
slots provided on the plug housing. Type
KI-STL is a similar insert that installs into
slots molded into the header housing.
When two of these inserts are located in
corresponding slots on both the plug and
header, the pair cannot be joined
because the inserts interfere with one
another. If the inserts are installed into
separate slots on the plug and header,
the pair will engage as usual.
Keying Inserts install quickly and easily
and are held securely in place by a
friction fit. You devise the pattern and
select the quantity of inserts required for
your application.
Packaged for convenient handling KI-AK
and KI-STL Inserts are supplied on
wheels of 6 inserts.
Factory keyed plugs and headers are
available, please consult Altech with
your keying requirements. Color: Red.
Molding Material: Polyamide 6.6.
KI
KEYING INSERTS
Type
Std. Pk.
Wheels/
Cat. No. Inserts
KI-AK 37.903 50/300
®
3.1mm
Use With
Types
AK950
AKZ950
AKZ1200
BU06
BU08
BU02
BU04
KSO
MARKING LABELS
Character
Imprint
Type
Std. Pk.
Cards/
Cat. No. Strips
1 - 12
13 - 24
12 - 1
Blank
KSO112
KSO1324
KSO121
KSO00
30.096
30.097
30.098
30.099
5/125
5/125
5/125
5/125
MARKING LABELS
Use KSO preprinted pressure sensitive
labels for printed circuit board applica-
tions where changing requirements
make it impractical to order and inven-
tory hot stamp imprinted terminal blocks.
Preprinted labels are quick and easy to
apply to all Fixed and Pluggable Printed
Circuit Terminal Blocks. Simply cut to
required length and peel strip from card.
Apply the strip to the terminal block by
exerting finger pressure.
Marking cards contain 25 strips and are
available in several standard number
combinations. Select from consecutive
ascending numbers 1 - 12, 13 - 24;
consecutive descending numbers 12 - 1;
and blank for hand marking. Custom
Marking Labels with special character
imprints are also available upon request.
Imprint is black on white labels. Material:
White PVC.
KI-STL 37.904 50/300
®
3.1mm
STL950
STL955
STLZ950
STLZ955
STLZ990
150
Altech Corp.^® • 35 Royal Road • Flemington NJ 08822-6000 • Phone [phone] • Fax [phone]