AKZ500 Datasheet, PDF (10/20 Pages) Altech corporation – FIXED PRINTED CIRCUIT

PREVIOUS
HOME
NEXT
FIND IT
PLUGGABLE
PRINTED CIRCUIT
US Pin Spacing^a
Pin Headers
STL(Z)130, STL(Z)132 Straight and
STL(Z)140 Right Angle Pin Headers are
used with the highly cost effective
Tubular Screw Clamp Plugs, Type
AK(Z)130 and AK(Z)132, in lighter duty
applications where infrequent wire to
board connections must be made. Type
STL(Z)132 features a reduced pin
diameter of 1.0mm (.0394") on the
soldering side.
Open Pin Headers are supplied in strips
up to 6 poles. The Pin Header strip
features breakaway construction that
eliminates cutting or sawing.
• Straight and Right Angle
• Strip Material: Polyamide 6.6
• Standard Color: Gray
a_{Blocks with metric pin spacing}
begin on page 132.
Ratings
IEC/VDE
(File No. E101811)
(File No. LR68503)
Ordering Information
Straight Pin Header,
US (Inch) Pin Spacing
No. of
Poles
2
3
4
5
6
STL(Z)130
Straight Pin Header
STL(Z)140
Right Angle Pin Header^b
Pin Spacing 5mm (.197)^c
Use with AK(Z)130, AK(Z)132 Plugs^b
Type
Current
10A
10A^e
10A^e
Voltage
250V
300V^e
300V^e
Cat. No.
Length L
mm (in.) Std. Pk.
STL(Z)130/2
STL(Z)130/3
STL(Z)130/4
STL(Z)130/5
STL(Z)130/6
30.352
30.353
30.354
30.355
30.356
10.00 ( .39) 100
15.00 ( .59) 100
20.00 ( .79) 50
25.00 ( .99) 50
30.00 (1.18) 50
Smaller pin diameter for 1.0mm (.0394")
through-holes
STL(Z)132
Straight Pin Header
Pin Spacing 5mm (.197)^d
Use with AK(Z)130, AK(Z)132 Plugs
Type
Current
10A
10A^e
10A^e
Voltage
250V
300V^e
300V^e
Cat. No.
Length L
mm (in.) Std. Pk.
STL(Z)132/2
STL(Z)132/3
STL(Z)132/4
STL(Z)132/5
STL(Z)132/6
32.502
32.503
32.504
32.505
32.506
10.00 ( .39) 100
15.00 ( .59) 100
20.00 ( .79) 50
25.00 ( .99) 50
30.00 (1.18) 50
Right Angle Pin Header,
US (Inch) Pin Spacing
2
STL(Z)140/2 30.472 10.00 ( .39) 100
3
STL(Z)140/3 30.473 15.00 ( .59) 100
4
STL(Z)140/4 30.474 20.00 ( .79) 50
5
STL(Z)140/5 30.475 25.00 ( .99) 50
6
STL(Z)140/6 30.476 30.00 (1.18) 50
L
®
2.8mm _®
L_®
® ^Ø1.3mm
Dimensions
mm
in.
mm
in.
1.00
0.039
5.50
0.217
1.30
0.051
6.00
0.236
2.00
0.079
11.80
0.465
2.80
0.110
12.50
0.492
3.50
0.138
® ^Ø1.3mm
STL(Z)130
L
®
11.8mm _®
5.5mm
®
® ^2mm
® ^Ø1.3mm
® ^Ø1.0mm
b_{To insure proper pin positioning, install header into AK(Z)130}
or AK(Z)132 Plug before soldering into board.
c_{Appropriate for use in US (inch) pin spacings up to the}
number of poles shown providing minimum PC Board
Hole Size is 1.5mm(.059 in.)
d_{Appropriate for use in US (inch) pin spacings up to the}
number of poles shown providing minimum PC Board
Hole Size is 1.5mm(.059 in.)
e_{Pending, STL(Z)140 and STL(Z)132}
Altech Corp.^® • 35 Royal Road • Flemington NJ 08822-6000 • Phone [phone] • Fax [phone]
121