ASM1815 Datasheet, PDF (1/9 Pages) Alliance Semiconductor Corporation – Low Power, 3.3V/3.0V uP Reset Active LOW, Push-Pull Output

February 2005
ASM1815
rev 1.4
Low Power, 3.3V/3.0V µP Reset Active LOW, Push-Pull Output
General Description
Applications
The ASM1815 is a voltage supervisory device with low-power,
3.3V/3.0V µP Reset, active LOW, Push-Pull output. Maximum
supply current over temperature is a low 15µA (at 3.6V).
The ASM1815 generates an active LOW reset signal whenever
the monitored supply is out of tolerance. A precision reference
and comparator circuit monitor power supply (V_CC) level.
Tolerance level options are 5%, 10% and 20%. When an out-of-
tolerance condition is detected, an internal power-fail signal is
generated which forces an active LOW reset signal. After V_CC
returns to an in-tolerance condition, the reset signal remains
active for 150ms to allow the power supply and system
microprocessor to stabilize.
• Set-top boxes
• Cellular phones
• PDAs
• Energy management systems
• Embedded control systems
• Printers
• Single board computers
Typical Operating Circuit
V_CC
ASM1815
The ASM1815 is designed with a push-pull output stage and
operates over the extended industrial temperature range.
Devices are available in TO-92 and compact surface mount
SOT-23 packages.
RESET
Microprocessor
RESET
Other low power products in this family include the ASM1810/
11/12/16/17, ASM1233D and ASM1233M.
GND
Key Features
• Low Supply Current
•20 µA maximum (5.5 V)
•15 µA maximum (3.6 V)
• Automatically restarts a microprocessor after power failure
• 150ms reset delay after V_CC returns to an in-tolerance con-
dition
• Active LOW power-up reset
• Precision temperature-compensated voltage reference and
comparator
• Eliminates external components
• TO-92 and compact surface mount SOT-23 package
• Push-Pull output for minimum current drain
• Operating temperature -40°C to +85°C
Block Diagram
V_{CC 2}
Supply
Tolerance
Bias
+
-
Reference
ASM1815
Delay
150ms
Typical
3
GND
1
RESET
Alliance Semiconductor
2575 Augustine Drive . Santa Clara, CA 95054 . Tel: [phone] . Fax: [phone] . www.alsc.com
Notice: The information in this document is subject to change without notice