FIT-221-116 Datasheet, PDF (2/4 Pages) Alpha Wire – Customer Specification

Physical &Mechanical Properties
1) Temperature Range
2) Shrink Ratio
3) Full Recovery Temperature
4) Minimum Shrink Temperature
5) Tensile Strength
6) Elongation
7) Low Temperature Flex(-55°C)
8) Heat Shock(250°C,4hrs)
9) Secant Modulus
10) Longitudinal Change
11) Specific Gravity(Colors)
Specific Gravity(Clear)
12) Shelf Life
Electrical Properties
1) Dielectric Strength
2) Volume Resistivity
Chemical Properties
1) Water Absorption
2) Corrosion(0°C,16hrs)
3) Fluid Resistance(23°C,24 Hrs)
4) Fungus Resistance
5) Vacuum Outgassing - CVCM
6) Halogen Free
7) Lead Free
Other
Packaging
-55 to 135°C
Approximately 2:1
121°C
90°C
1500psi, Min
200%, Min
no cracking
no cracking
2.5x10 ⁴ psi, Min
+/-5%
1.35, Max
1.00, Max
5 Years @ 18 to 35°C
500 V/mil, Min
1x10 ¹⁴ ohm-cm, Min
0.50%, Max
no corrosion
1000 PSI, Min
Pass
0.10%, Max
No
Yes
ASTM D638
ASTM D638
AMS-DTL-23053
AMS-DTL-23053
ASTM D882
AMS-DTL-23053
ASTM D792
ASTM D876
ASTM D876
ASTM D570
AMS-DTL-23053
AMS-DTL-23053
AMS-DTL-23053
ASTM E595
www.alphawire.com
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742)
Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications
described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not
ensure product availability.
Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or
implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,
even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out
of or in connection with the use, or inability to use, the information or specifications described herein.