FIT-105-MS-1 Datasheet, PDF (2/3 Pages) Alpha Wire – All materials used in the manufacture of this part are in compliance

Physical & Mechanical Properties
1) Temperature Range
2) Shrink Ratio
3) Full Recovery Temperature
4) Minimum Shrink Temperature
5) Tensile Strength
6) Elongation
7) Cold Impact(-55°C)
8) Heat Shock(180°C,4hrs)
9) Secant Modulus
10) Longitudinal Change
11) Specific Gravity
12) Shelf Life
Electrical Properties
1) Dielectric Strength
2) Volume Resistivity
Chemical Properties
1) Water Absorption
2) Corrosion(0°C,16hrs)
3) Fungus Resistance
4) Halogen Free
5) Lead Free
-20 to 105°C
Approximately 2:1
105 °C
100°C
3000psi, Min
300%, Min
no cracking
no cracking
2.5x10 ⁴ psi, Min
+1%/-25%
1.32, Max
1 Years @ 18 to 35°C
1083 V/mil, Min
1x10 ¹² ohm-cm, Min
1.00%, Max
no corrosion
Pass
No
Yes
ASTM D638
ASTM D638
ASTM D746
AMS-DTL-23053
ASTM D882
AMS-DTL-23053
ASTM D792
ASTM D876
ASTM D876
ASTM D570
AMS-DTL-23053
AMS-DTL-23053
www.alphawire.com
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742)
Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications
described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not
ensure product availability.
Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or
implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,
even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out
of or in connection with the use, or inability to use, the information or specifications described herein.
ALPHA WIRE - CONFIDENTIAL AND PROPRIETARY
Notice to persons receiving this document and/or technical information. This document is confidential and is the exclusive property of ALPHA WIRE,
and is merely on loan and subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges and
agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no portion of this document may be
copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In the case of conflicting contractual provisions, this notice shall
govern the status of this document. ©2013 ALPHA WIRE - all rights reserved.