9158S Datasheet, PDF (2/3 Pages) Alpha Wire – Customer Specification

Physical & Mechanical Properties
1) Temperature Range
2) Bend Radius
3) Pull Tension
Electrical Properties
1) Voltage Rating
2) Characteristic Impedance
3) Ground Capacitance
4) Velocity of Propagation
5) Conductor DCR
6) OA Shield DCR
7) Voltage Withstanding
8) Attenuation, Max dB/100ft
Other
1) Packaging
a) 1000 FT
b) 500 FT
-70 to 200°C
10X Cable Diameter
12.7 Lbs, Maximum
(For Engineering purposes only)
300 VRMS
50 +/- 3
30 pf/ft @1 kHz, Nominal
70 %
10.1 /1000ft @20°C, Nominal
4.1 /1000ft @20\°C, Nominal
3 kV, Minimum
4.9 @ 100 MHz
18 @ 900 MHz
www.alphawire.com
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742)
Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications
described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not
ensure product availability.
Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or
implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,
even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out
of or in connection with the use, or inability to use, the information or specifications described herein.
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com
RoHS CERTIFICATE OF COMPLIANCE
To Whom It May Concern:
Alpha Wire Part Number:9158S
9158S , RoHS-Compliant Commencing With11/1/2004Production
This document certifies that the Alpha part numbers cited above are manufactured in accordancewith Directive 2002/95/EC of the European
Parliament and of the Council of 27 January 2003,better known as the RoHS Directives, with regards to restrictions of the use of certain
hazardoussubstances used in the manufacture of electrical and electronic equipment. The reader is referredto these Directives for the specific
definitions and extents of these Directives. No Exemptions arerequired for RoHS Compliance on this item.