58612 Datasheet, PDF (2/3 Pages) Alpha Wire – Customer Specification

1) EU Directive 2002/95/EC(RoHS):
2) REACH Regulation (EC 1907/2006):
3) California Proposition 65:
Properties
Physical &Mechanical Properties
1) Temperature Range
2) Bend Radius
3) Pull Tension
Electrical Properties
1) Voltage Rating
2) Mutual Capacitance
3) Ground Capacitance
Other
Packaging
a) 1000 FT
b) 500 FT
All materials used in the manufacture of this part are in compliance with EU Directive
2002/95/EU regarding the restriction of use of certain hazardous substances in electrical and
electronic equipment. Consult Alpha Wire's web site for compliance Date of Manufacture.
This product does not contain Substances of Very High Concern (SVHC) listed on the European
Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,
please see Alpha's REACH SVHC Declaration.
The outer surface materials used in the manufacture of this part meet the requirements of
California Proposition 65.
-25 to 125°C
10X Cable Diameter
42 Lbs, Maximum
(For Engineering purposes only)
150 VRMS
25 pf/ft @1 kHz, Nominal
45 pf/ft @1 kHz, Nominal
Flange x Traverse x Barrel (inches)
12 x 10 x 5 Max. 3 separate pieces; Min length/piece 250 FT.
12 x 4.5 x 3.5 Continuous length
[Spool dimensions may vary slightly]
www.alphawire.com
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742)
Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure there accuracy at the time of publication, information and specifications
described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not
ensure product availability.
Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or
implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,
even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out
of or in connection with the use, or inability to use, the information or specifications described herein.