AP640R5-A3 Datasheet, PDF (5/5 Pages) Alpha Industries – 23-34 GHz Surface Mount SPDT Switch

23–34 GHz Surface Mount SPDT Switch
AP640R5-A3
Alpha-2™ Surface Mount Package
Handling and Mounting
Millimeterwave components require careful mounting
design to maintain optimal performance. Alpha-2™ surface
mount packages (patent pending) provide a rugged and
repeatable electrical connection using standard solder
techniques.
The -A3 package is one of several parts in the Alpha-2™
surface mount package family.
Handling
The -A3 surface mount package is very rugged. However,
due to ceramic’s brittle nature one should exercise care
when handling with metal tools. Do not apply heavy
pressure to the lid. Vacuum tools may be used to pick and
place this part.
Only personnel trained in both ESD precautions and
handling precautions should be allowed to handle these
packages.
Package Construction
The -A3 surface mount package consists of a base and
a lid. The package base is ceramic with filled vias and
plated castellations. The package lid is un-plated alumina.
The lid seal is epoxy.
Mounting Design
The -A3 surface mount package is installed on top of a
printed circuit board on a specially designed footprint.
Mounting footprint geometry for the -A3 package will be
supplied by Alpha Industries in electronic formats or paper
drawing.
B1
B2
Via Holes
to Ground
J3
J2
J1
Footprint Geometry for -A3 Surface Mount Package.
Mounting the Package
The -A3 surface mount package is compatible with high-
volume surface mount installation using solder. RF and
DC connections are accomplished with metallized edge
castellations that hold solder fillets. Ground connections
are accomplished by both metallized edge castellations
and filled vias to the bottom of the package. Care should
be taken to ensure that there are no voids or gaps in the
solder so that a good RF, DC, and ground contact is
maintained.
DC Control Lines (2)
RF Signal
Lines (3)
Printed Circuit Board
Rogers 4003, 0.008" (0.20 mm)
Thick or Equivalent
-A3 Surface Mount Package Installation.
5
Alpha Industries, Inc. [781] 241-7000 • Fax [978] 241-7906 • Email [e-mail] • www.alphaind.com
Specifications subject to change without notice. 12/01A