100 Datasheet, PDF (3/3 Pages) List of Unclassifed Manufacturers – 100/200

Chip On Board Mixer Quads
100, 101, 102
0.005 (0.13 mm)
0.001 (0.02 mm) TYP.
INK DOT 0.010 (0.25 mm) DIA. MIN.
COLOR PER INTERNAL SPECIFICATION
0.100 (2.54 mm)
+0.002 (0.05 mm)
-0.004 (0.10 mm)
0.026
(0.66 mm) MIN.
()
0.030 (0.76 mm)
GLASS DAM
±0.003 (0.08 mm)
SQ.
0.120 (3.05 mm)
+0.002 (0.05 mm)
EPOXY ENCAPSULATION
-0.004 (0.10 mm)
0.040
(1.02 mm)
MAX.
(BLACK)
0.020 (0.51 mm)
X 0.010 (0.25 mm)
ORIENTATION MARK
0.020 (0.51 mm)
GLASS NOT
± 0.002 (0.05 mm) _{SHOWN FOR CLARITY}
106
0.085 (2.159 mm) SQ.
EPOXY
ENCAPSULATION
0.003
(0.08 mm) TYP.
EPOXY
ENCAPSULATION
0.015
(0.38 mm)
0.003
(0.08 mm)
TYP
45˚ REF.
0.017
(0.43 mm)
0.026
0.020 (0.51 mm) MAX. ^{(0.66 mm)}
0.024
(0.61 mm)
GLASS GOLD METALIZATION Pd/Pt /Ag METALIZATION
103
ORIENTATION
DOT
0.020
(0.51 mm)
±0.003
(0.08 mm)
0.140 (3.56 mm)
± 0.003 (0.08 mm)
SCHEMATIC
DOT 2
1
3
6
4
5
0.130 (3.30 mm)
±0.003 (0.08 mm)
0.025 (0.64 mm)
±0.003 (0.08 mm)
0.050
(1.27 mm)
MAX.
0.020 (0.51 mm)
±0.002 (0.05 mm)
CERAMIC SUBSTRATE
Notes:
1. Bottom side is free of metalization.
2. The minimum specified area of the contact pads (0.017 x 0.022) shall
be free of epoxy.
Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [e-mail] • www.alphaind.com
3
Specifications subject to change without notice. 6/99A