AS193-73 Datasheet, PDF (1/2 Pages) Alpha Industries – PHEMT GaAs IC High Linearity 3 V Control SPDT Switch 0.1-2.5 GHz

PHEMT GaAs IC High Linearity 3 V
Control SPDT Switch 0.1–2.5 GHz
AS193-73
Features
s +2.5 to +5 V Linear Operation
s Harmonics H₂, H₃ > 65 dBc @
P_IN = 34.5 dBm
s Low Insertion Loss (0.35 dB @ 0.9 GHz)
s High Isolation (24 dB @ 0.9 GHz)
s Ultra Miniature SOT-6 Package
s PHEMT Process
Description
The AS193-73 is a PHEMT GaAs FET IC high linearity
SPDT switch in a SOT-6 plastic package. This switch has
been designed for use where extremely high linearity, low
control voltage, high isolation, low insertion loss and ultra
miniature package size are required. It can be controlled
with positive, negative or a combination of both voltages.
Some standard implementations include antenna
changeover, T/R and diversity switching over 3 W. The
SOT-6
0.074
(1.90 mm REF.)
PIN 6
PIN 1
INDICATOR
PIN 1
0.126 (3.20 mm)
0.087 (2.20 mm)
0.071 (1.80 mm)
0.052 (1.30 mm)
0.020 (0.51 mm)
0.014 (0.350 mm)
0.006
(0.15 mm)
0.000
(0.00 mm)
0.057 (1.45 mm)
0.035 (0.90 mm)
0.037 (0.95 mm) REF.
5.0˚ ± 1˚
0.012
(0.30 mm)
TYP.
0.014
(0.26 mm)
0.004
(0.10 mm)
5.0˚ ± 1˚
0.122 (3.10 mm)
0.106 (2.70 mm)
0.022 (0.61 mm)
0.004 (0.10 mm)
AS193-73 switch can be used in many analog and digital
wireless communication systems including cellular, GSM
and UMTS applications.
Electrical Specifications at 25°C (0, +3 V)
Insertion Loss²
Parameter¹
Isolation
VSWR³
Frequency
0.1–0.5 GHz
0.5–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
0.1–0.5 GHz
0.5–1.0 GHz
1.0–2.0 GHz
2.0–2.5 GHz
0.1–1.0 GHz
1.0–2.5 GHz
Min.
28
22
17
15
Typ. Max. Unit
0.30
0.4
dB
0.35
0.5
dB
0.45
0.6
dB
0.55
0.7
dB
30
dB
24
dB
19
dB
17
dB
1.2:1
dB
1.3:1
dB
Operating Characteristics at 25°C (0, +3 V)
Parameter
Switching Characteristics⁴
Condition
Rise, Fall (10/90% or 90/10% RF)
On, Off (50% CTL to 90/10% RF)
Video Feedthru
Frequency
Min.
Typ. Max. Unit
60
ns
100
ns
50
mV
Input Power for -0.1 dB Compression 0/+3 V
0.9 GHz
+37
dBm
Harmonics H₂, H₃
P_IN = 34.5 dBm
0.9 GHz
+65
dBc
Control Voltages
V_Low = 0 to 0.2 V @ 20 µA Max.
V_High = +2.5 V @ 100 µA Max. to +5 V @ 200 µA Max.
1. All measurements made in a 50 Ω system, unless otherwise specified.
2. Insertion loss changes by 0.003 dB/°C.
3. Insertion loss state.
4. Video feedthru measured with 1 ns risetime pulse and 500 MHz bandwidth.
Alpha Industries, Inc. [781] 935-5150 • Fax [617] 824-4579 • Email [e-mail] • www.alphaind.com
1
Specifications subject to change without notice. 6/01A