AMG-LM302 Datasheet, PDF (22/23 Pages) alpha microelectronics gmbh – Ballast Controller for Metal Halide Lamps

AMG-LM302
Ballast Controller for Metal Halide Lamps
14. Ordering Information
AMG-LM302-ITQ48T
shipment in trays
15. Notes and Cautions
15.1. ESD Protection
The Requirements for Handling Electrostatic Discharge Sensitive Devices are described in the
JEDEC standard JESD625-A. Please note the following recommendations:
 When handling the device, operators must be grounded by wearing a for the purpose
designed grounded wrist strap with at least 1MΩ resistance and direct skin contact.
 Operators must at all times wear ESD protective shoes or the area should be
surrounded by for ESD protection intended floor mats.
 Opening of the protective ESD package that the device is delivered in must only occur at
a properly equipped ESD workbench. The tape with which the package is held together
must be cut with a sharp cutting tool, never pulled or ripped off.
 Any unnecessary contact with the device or any unprotected conductive points should be
avoided.
 Work only with qualified and grounded tools, measuring equipment, casing and
workbenches.
 Outside properly protected ESD-areas the device or any electronic assembly that it may
be part of should always be transported in EGB/ESD shielded packaging.
15.2. Storage conditions
The AMG-LM302 corresponds to moisture sensitivity classification ML2 , according to JEDEC
standard J-STD-020, and should be handled and stored according to J-STD-033.
16. Disclaimer
Information given in this data sheet is believed to be accurate and reliable. However, no
responsibility is assumed for the consequences of its use nor for any infringement of patents
or other rights of third parties that may result from its use.
The values stated in Absolute Maximum Ratings may under no circumstances be exceeded.
No warranty is given for use in life support systems or medical equipment without the specific
written consent of alpha microelectronics gmbh. For questions regarding the application
please contact the publisher.
The declared data are only a description of the product. They are not guaranteed properties
as defined by law. Examples are given without obligations and cannot give rise to any liability.
Reprinting of this data sheet – or any part of it – is not allowed without the license of the
publisher. Data sheets are subject to change without any notice.
AMG-LM302 Revision: A
29. Jul. 2010 © All rights reserved Page 22 of 23