AMG-LL7AXX Datasheet, PDF (13/14 Pages) alpha microelectronics gmbh – Family of HV LED Driver Modules

AMG-LL7AXX
Family of HV LED Driver Modules
12. Ordering Information
P/N
Type
AMG-LL7A1M-IPM06E
AMG-LL7A2M-IPM06E
AMG-LL7A3M-IPM06E
AMG-LL7A1S-IPM06E
AMG-LL7A2S-IPM06E
AMG-LL7A3S-IPM06E
AMG-LL7A4M-IPM06E
AMG-LL7A5M-IPM06E
AMG-LL7A6M-IPM06E
AMG-LL7A4S-IPM06E
AMG-LL7A5S-IPM06E
AMG-LL7A6S-IPM06E
AMG-LL7A7M-IPM06E
AMG-LL7A8M-IPM06E
AMG-LL7A9M-IPM06E
AMG-LL7A7S-IPM06E
AMG-LL7A8S-IPM06E
AMG-LL7A9S-IPM06E
Master
Master
Master
Slave
Slave
Slave
Master
Master
Master
Slave
Slave
Slave
Master
Master
Master
Slave
Slave
Slave
Avg.
Current/mA
350
350
350
350
350
350
700
700
700
700
700
700
1500
1500
1500
1500
1500
1500
Voltage/V
120
230
277
120
230
277
120
230
277
120
230
277
120
230
277
120
230
277
13. Notes and Cautions
13.1. ESD Protection
The Requirements for Handling Electrostatic Discharge Sensitive Devices are described in the
JEDEC standard JESD625-A. Please note the following recommendations:
 When handling the device, operators must be grounded by wearing a for the purpose
designed grounded wrist strap with at least 1MΩ resistance and direct skin contact.
 Operators must at all times wear ESD protective shoes or the area should be
surrounded by for ESD protection intended floor mats.
 Opening of the protective ESD package that the device is delivered in must only occur at
a properly equipped ESD workbench. The tape with which the package is held together
must be cut with a sharp cutting tool, never pulled or ripped off.
 Any unnecessary contact with the device or any unprotected conductive points should be
avoided.
 Work only with qualified and grounded tools, measuring equipment, casing and
AMG-
LL7AXX
Revision: A
11. Apr. 2012 © All rights reserved Page 13 of 14