AMG-LL75X Datasheet, PDF (11/12 Pages) alpha microelectronics gmbh – High Efficiency Step Down LED Driver for High Brightness LED and OLED

AMG-LL75x
High Efficiency Step Down LED Driver for High Brightness LED and OLED
9. Ordering Information
Order Code
AMG-LL751-IPM05E
AMG-LL752-IPM05E
AMG-LL753-IPM05E
AMG-LL754-IPM05E
AMG-LL755-IPM05E
AMG-LL756-IPM05E
Note(s):
Color Code
Orange
Orange
Orange
Orange
Red
Red
10. Module Dimensions
Description
350mA regulator, input solder, output solder
350mA regulator, input crimp, output solder
350mA regulator, input crimp, output plug
350mA regulator, input crimp, output crimp
200mA regulator, low ripple, input solder, output solder
200mA regulator, low ripple, input crimp, output crimp
Dimensions in mm
Height at thickest point: 6.5mm
Tolerances: -
Outer Contour: ±0.2mm
When mounting on a conductive surface make sure to add spacers or an insulating layer
under the module to avoid short circuits.
a) Crimp Connectors
The crimp connectors used on the LW05 require a special crimping tool. Crimping tools
can be purchased separately. Wires with insulation diameter 0.7 to 1mm fit into the
connectors.
11. Board-Revision
4 digit board revision code
12. Notes and Cautions
12.1. ESD Protection
The Requirements for Handling Electrostatic Discharge Sensitive Devices are described in the
JEDEC standard JESD625-A. Please note the following recommendations:
AMG-LL75x Revision: A
28. Mar. 2012 © All rights reserved Page 11 of 12