AMG-DF102 Datasheet, PDF (1/12 Pages) alpha microelectronics gmbh – Full Bridge MOSFET/IGBT Driver up to 600V

AMG-DF102
Full Bridge MOSFET/IGBT Driver up to 600V
1. Functional Description of the AMG-DF102
The AMG-DF102 is a high voltage MOSFET and IGBT driver with two dependent high and low
side output channels for Full-Bridge applications. The IC AMG-DF102 has an additional driver
in high side configuration to drive a buck converter.
CMOS and TTL compatible input levels. Logic inputs are CMOS Schmitt-triggered with pull-
down resistors.
The floating high side outputs are designed for bootstrap operation so to drive an N-channel
power MOSFET or IGBT in high side configuration.
During start up the input ENQ need to be tied to VCC to pull the driver outputs low. With ENQ
being pulled low, the device is enabled. This protects against unwanted behaviour of the
power stage during the start up process, when the supply voltage is rising.
2. Features
 Logic supply range from 12 to 15V
 CMOS Schmitt-triggered input logic with pull-down
 Internally inserted dead time
 High side output follows corresponding input
 Floating high side outputs designed for bootstrap operation
 Enable input turns off all outputs
 Under-voltage detection for all outputs
 Temperature range –25°C to 85°C
 Package SOP24
3. Application
The AMG-DF102 is suitable for High Voltage Power Supplies, Motor Controls, Inverters,
Battery Chargers and Lamp Ballasts.
AMG-DF102 Revision: AB
30. Nov. 2010 © All rights reserved Page 1 of 12