SCM30F Datasheet, PDF (1/1 Pages) Allied Components International – SMD Wirewound Common Mode Filter

SCM30F SMD Wirewound Common Mode Filter
.177±.007
4.52±0.2
.110±.007
2.8±0.2
Dimensions: ^Inches
(mm)
.125±.007
3.2±0.2
.047±.003
1.2±0.1
.047±.003
1.2±0.1
.039±.003
1.0±0.1
.039±.003
1.0±0.1
Features
• Minature SMD common mode filter
• Excellent noise attenuation in a small
package
• Suitable for automated assembly
• SCM series offers wide impedance
range
• Excellent solderability
Allied
Part
Number
Common Mode
Inductance
(µH)+50/-30%
[100kHz]
DC
Resistance
( Ω)
SCM30F-510-RC
51
1.0
SCM30F-101-RC
100
2.0
Electrical
Impedance range: 51Ω to 100Ω
Tolerance: 20% over entire range
Test Frequency: 100Mhz
Withstand Voltage: 125Vdc Max
Operating Temp: -40ºC ~ +125ºC
IDC: Inductance drop 10% Typ.
from original value with no current
DCR: Single Wire Test Value
All specifications subject to change without notice.
Resistance to Solder Heat
Pre-Heat 150ºC, 1 minute
Solder Composition: Sn99.5%-Cu0.5%
Solder Temp: 245±5ºC
Rated
Current
(mA)
200
100
Test Equipment
(Z): HP4291A+HP16197A
(DCR): HP4338B
Insulation Resistance: HP4339
Physical
Packaging: 500 pieces per 7 inch reel
Marking: None
RoHS
Rated
Voltage
Vdc
50
50
IR
(Ω)
Min.
10M
10M
949-356-1780
ALLIED COMPONENTS INTERNATIONAL
10/14/2015
www.alliedcomponents.com