PCSLR2D18 Datasheet, PDF (1/1 Pages) Allied Components International – Power Chip Shielded Inductors

RoHS
Power Chip Shielded Inductors PCSLR2D18
Dimensions: ^Inches
(mm)
*Allied
Part
Number
Inductance Tolerance
(µh)
(%)
Test
Freq.
KHz,1v
DCR
(Ω)
Max
Rated
Current
(A)
Irms
(A)
Max.
Marking
PCSLR2D18-2R2_-RC 2.2
30
100 0.041 0.85 2.30 CC
PCSLR2D18-3R3_-RC 3.3
30
100 0.054 0.75 2.10 DD
PCSLR2D18-4R7_-RC 4.7
30
100 0.078 _0.63 1.65 _EH
PCSLR2D18-6R8_-RC 6.8
30
100 0.106 0.52 1.32 GI
PCSLR2D18-100_-RC 10
30
100 0.180 0.43 1.00 KA
PCSLR2D18-150_-RC 15
30
100 0.220 0.35 0.80 MA
PCSLR2D18-220_-RC 22
PCSLR2D18-330_-RC 33
30
100 0.320 0.30 0.68 LA
30
100 0.460 0.24 ^0.56 NA
PCSLR2D18-390_-RC 39
30
100 0.600 0.22
PA
PCSLR2D18-470_-RC 47
30
100 0.660 0.20 ^{0.48 OA}
*For 20% insert “M”, for 30% insert “T” All specifications subject to change without notice.
Features
• Shielded SMD Power Inductor
• Low DC Resistance
• Ideal for use in DC-DC converter applications
Electrical
Inductance Range: 2.2µH to 47µH
Tolerance: Available in 20% and 30%
Operating Temp: -30ºC ~ +100ºC
IDC: Current at which inductance
drops by 10% of intial value
Itemp current: Value obtained when
current flows and the temperature has
risen to 40ºC
Resistance to Soldering Heat
Pre-Heat 150ºC, 1 minute.
Solder Composition: Sn/Ag3.0/Cu0.5
Solder Temp: 260ºC ± 5ºC for 10 sec. ± 1 sec.
Test Equipment
(L): PM3260A / HP4284A / HP4285A
(RDC): Chen Hwa 502BC
(IDC): HP4284 + HP42841A /
Chen Hwa 1061 + 301A
Physical
Packaging: 1000 pieces per 7 inch reel.
Marking: As Shown
949-356-1780
ALLIED COMPONENTS INTERNATIONAL
REVISED₁₅09/03/2014
www.alliedcomponents.com