PCSDW125-3R3M-RC Datasheet, PDF (1/1 Pages) Allied Components International – SMD COMMON MODE POWER INDUCTORS

RoHS
SMD COMMON MODE POWER INDUCTORS PCSDW125
Dimensions: ^Inches
(mm)
Allied
Part
Number
Inductance Tolerance
Test
(_µh)
(%)
Freq.
KHz, 0.25V
DCR
(Ω)
Rated
Current
(A)
PCSDW125-3R3M-RC 3.3
20
100
0.0076 12.700
PCSDW125-220M-RC
22
20
100
0.1020
4.710
PCSDW125-680M-RC
68
20
100
0.2800
2.620
PCSDW125-821M-RC
81
20
100
0.7700
1.490
Land Pattern
Schematic
Features
• Small SMD common mode choke
• Suitable for reflow soldering
• Low DCR
• Suitable for pick and place
Electrical
Inductance Range: 3.3µh to 820µh
Tolerance: 20% over entire inductance range
Available in tighter tolerances
Operating Temp: -55ºC ~ +125ºC
Rated Current: Current at which the inductance
drops 35% of initial value or ∆ T=40ºC
whichever is lower
Resistance to Soldering Heat
Pre-Heat 150ºC, 1 Min.
Solder Temp: 260ºC +/- 5ºC
Immersion time: 10 sec. +/- 1 sec.
Test Equipment
(L): HP 4284A LCR meter or equivalent
(DCR): HP 4338B Millohm meter or equivalent
(Rated Current): 3260N WK LCR Meter &
DC Bias 3265B WK
Physical
Packaging: 500 pieces per 13 inch reel.
Marking: EIA Inductance Code.
All specifications subject to change without notice.
714-665-1140
ALLIED COMPONENTS INTERNATIONAL
05/101/150
www.alliedcomponents.com