PCSDR129 Datasheet, PDF (1/1 Pages) Allied Components International – Power Chip Shielded Inductors

RoHS
Power Chip Shielded Inductors PCSDR129
Dimensions: ^Inches
(mm)
0.492
12.5
0.492
12.5
0.413
10.5)
0.197
5.0
0.299
7.6
Allied
Part
Number
Inductance Tolerance Test
DCR
(_µh)
(%)
Freq. (mΩ) Max
KHz, 0.25V
PCSDR129-101M-RC 100
PCSDR129-221M-RC 220
20
100
125
20
100
300
All specifications subject to change without notice.
I rms
(A) Max
2.4
1.7
I sat
(A) Typ
3.1
2.2
Features
• Magnetically Shielded
• High saturation current
• Expanded operating temp range
• Low DC Resistance
• High Energy Storage
• Low Energy Loss
• Suitable for pick and place
Electrical
Inductance Range: 100uH~220uH
other valules available
Tolerance: 20%,
Test Frequency: 1KHz, 0.25V
Operating Temp: -40ºC ~ +105ºC
Irms: Current at which the delta T=40ºC
Isat: Current at which the inductance
drops 10% from initial value
Resistance to Soldering Heat
Pre-Heat 150ºC, 1 Min.
Solder Composition: Sn/Ag3.0/Cu0.5
Solder Temp: 260ºC +/- 5ºC
Immersion time: 10 sec. +/- 1 sec.
Test Equipment
(L): HP 4284A LCR meter or equivalent
(RDC): HP 4338B Millohm meter or
equivalent
(IDC): 3260B WK & DC Bias 3265B WK
Physical
Packaging: 300 pieces per 13 inch reel.
Marking: EIA Inductance Code.
714-665-1140
ALLIED COMPONENTS INTERNATIONAL
04/¹0⁵6/14
www.alliedcomponents.com