PCHC103R7 Datasheet, PDF (1/1 Pages) Allied Components International – Power Choke High Current

RoHS
Power Choke High Current PCHC103R7
.457
(11.6)
MAX
.397+/-.011
(10.1+/-0.3)
.118
(3.0) ^MAX
Dimensions: ^IInncchheess
(mm)
.098+/-0.019
(2.5+/-0.5)
.118 Typ.
(3.0 Typ.)
Recommended Pattern
.138
Recommended Pattern ^(3.5)
.158
(4.0)
.375
(9.5
Allied
Part
Number
Inductance Tolerance
(uh)
(%)
DCR
(mΩ)
Max.
Irms
(A)
Typ.
Isat
(A)
Typ.
PCHC103R7-R33M-RC .33
PCHC103R7-1R0M-RC 1.0
20
1.6
23
32
20
1.2
15
21
PCHC103R7-1R5M-RC 1.5
20
1.2
13.5
18
All specifications subject to change without notice.
Features
• Magnetically shielded Construction
• High saturation current up to 32A
• Low DC Resistance
• Expanded operating temp range
• Suitable for pick and place
Electrical
Inductance Range: .33µh to 1.5µh,
additional values available.
Tolerance: 20% over entire range
Available in tighter tolerances.
Test Frequency: 100KHz, 0.5V
Operating Temp: -55ºC ~ +125ºC
StorageTemp: -55ºC ~ +125ºC
Temp Rise: T=40ºC Typical heat rated
current.
Inductance Drop: 30% typical at rated Isat
drop approximately 30%.
Under no conditions should the temperature
of the part exceed 125ºC.
Resistance to Soldering Heat
Pre-Heat 150ºC, 1 Min.
Solder Composition: Sn/Ag3.0/Cu0.5
Solder Temp: 260ºC ± 5ºC
Immersion Time: 10 sec. ± 1 sec.
Test Equipment
(L): WK 3260B
DCR: Chen HWA502
IDC: 3260B WK & DC Bias 3265B WK
Physical
Packaging: 500 pieces per 13 inch reel.
Marking: EIA Inductance Code
949-356-1780
ALLIED COMPONENTS INTERNATIONAL
11/24₁/2₅014
www.alliedcomponents.com