MLB30-250-RC Datasheet, PDF (1/1 Pages) Allied Components International – Multilayer Ferrite Beads

MLB30 thru 50 Multilayer Ferrite Beads
RoHS
MLB30
0.126±0.008
(3.20±0.20)
0.098±0.008
(2.50±0.20)
0.051±0.008
(1.30±0.20)
0.020±0.012
(0.5±0.30)
0.071
(1.80)
MLB40
0.177±0.010
(4.50±0.25)
Dimensions: ^Inches
(mm)
0.063±0.008
(1.60±0.20)
0.063±0.008
(1.60±0.20)
0.020±0.012
(0.5±0.30)
0.047
(1.2)
0.079
(2.0)
0.078
(0.99)
MLB50
0.177±0.010
(4.50±0.25)
0.118
(3.00)
0.126±0.008
(3.20±0.20)
0.059±0.008
(1.50±0.20)
0.020±0.012
(0.5±0.30)
0.094
(2.4)
0.118
(3.00)
0.059
(1.50)
Allied
Part
Number
Impedance (Ω)
@ 100 MHz
+/- 25%
DC
Resistance
(Ω) Max.
*Rated
Current
(mA)
MLB30
MLB30-250-RC
25
0.10
500
MLB30-600-RC
60
0.20
500
MLB30-700-RC
70
0.20
500
MLB40
MLB40-330-RC
33
0.20
600
MLB40-500-RC
50
0.20
600
MLB40-600-RC
60
0.20
600
MLB40-800-RC
80
0.20
600
MLB40-900-RC
90
0.30
500
MLB40-101-RC
100
0.30
500
MLB40-151-RC
150
0.30
500
MLB40-171-RC
170
0.30
500
MLB50
MLB50-700-RC
70
0.30
500
MLB50-121-RC
120
0.30
500
MLB50-125-RC
125
0.30
500
MLB50-131-RC
130
0.30
500
MLB50-151-RC
150
0.30
500
*Temperature rise shall not be more than 30°C at rated current.
All specifications are subject to change without notice.
0.059
(1.50)
Features
• Surface mount EMI suppression components
• Nickel barrier termination for excellent resistance to solder heat
• Multi layer technology
• Flow and reflow soldering
Electrical
Impedance Range:
MLB30 from 25Ω to 70Ω
MLB40 from 33Ω to 170Ω
MLB50 from 70Ω to 150Ω
Tolerance: 25% over entire range
Operating Range: -55ºC ~ +125ºC
Storage Temp: Under 25ºC at 40~60% Humidity
Rated Current: Based on temp rise not to exceed 30ºC
Resistance to Solder Heat
Pre-Heat 150ºC, 1 minute
Solder Composition: Sn/Ag3.0/Cu0.5
Solder Temp: 260±5ºC for 10sec ±1 sec.
Minimum of 75% of Electrode covered with new solder.
Impedance within 30% of initial value.
Test Equipment
(Z): HP4291A RF Impedance/Material Analyzer
(RDC): Chen Hwa 502BC
Physical
Packaging: MLB30 2500 per 7 inch reel.
MLB40 2000 per 7 inch reel.
MLB50 1000 per 7 inch reel.
Marking: None
714-665-1140
ALLIED COMPONENTS INTERNATIONAL
REVISED 6/25/09
www.alliedcomponents.com