MLB20-080-RC Datasheet, PDF (1/1 Pages) Allied Components International – Multilayer Ferrite Beads

MLB20
Multilayer Ferrite Beads
RoHS
MLB20
0.126±0.008
(3.2±.20)
Dimensions: ^Inches
(mm)
0.063±0.008
(1.60±0.20)
0.043±0.008
(1.1±0.20)
0.020±0.012
(0.5±0.30)
0.047
(1.2)
0.079
(2.0)
0.054
(1.37)
Features
• Surface mount EMI suppression components
• Nickel barrier termination for excellent resistance to solder heat
• Multi layer technology
• Flow and reflow soldering
Electrical
Impedance Range: 8Ω to 2000Ω
Tolerance: 25% over entire range
Operating Range: -55ºC ~ +125ºC
Storage Temp: Under 25ºC at 40~60% Humidity
Rated Current: Based on temp rise not to exceed 30ºC
Resistance to Solder Heat
Pre-Heat 150ºC, 1 minute
Solder Composition: Sn/Ag3.0/Cu0.5
Solder Temp: 260±5ºC for 10sec ±1 sec.
Minimum of 75% of Electrode covered with new solder.
Impedance within 30% of initial value.
Test Equipment
(Z): HP4291A RF Impedance/Material Analyzer
(RDC): Chen Hwa 502BC
Physical
Packaging: 3000 per 7 inch reel.
Marking: None
Allied
Part
Number
Impedance (Ω)
@ 100 MHz
+/- 25%
DC
Resistance
(Ω) Max.
***Rated
Current
(mA)
MLB20-080-RC
MLB20-090-RC
MLB20-110-RC
MLB20-170-RC
MLB20-190-RC
MLB20-220-RC
MLB20-240-RC
MLB20-260-RC
MLB20-300-RC
MLB20-310-RC
MLB20-320-RC
MLB20-330-RC
MLB20-350-RC
MLB20-470-RC
MLB20-500-RC
MLB20-520-RC
MLB20-600-RC
MLB20-700-RC
MLB20-750-RC
MLB20-800-RC
MLB20-900-RC
MLB20-101-RC
MLB20-121-RC
MLB20-151-RC
MLB20-201-RC
MLB20-221-RC
MLB20-301-RC
MLB20-401-RC
MLB20-471-RC
MLB20-501-RC
MLB20-601-RC
MLB20-102-RC
MLB20-122-RC
MLB20-152-RC
MLB20-202-RC
8
9
11
17
19
22
24
26
30
31
32
33
35
47
50
52
60
70
75
80
90
100
120
150
200
220
300
400
470
500
600
*1000
*1200
*1500
**2000
0.05
600
0.05
600
0.05
600
0.05
600
0.05
600
0.05
600
0.05
600
0.05
600
0.05
600
0.05
600
0.05
600
0.05
600
0.10
500
0.10
500
0.10
500
0.10
500
0.10
500
0.10
500
0.15
500
0.15
500
0.15
500
0.15
500
0.15
500
0.15
500
0.20
400
0.20
400
0.20
400
0.20
400
0.20
400
0.20
400
0.30
400
0.40
200
0.40
200
0.45
200
0.60
200
* at 50MHz. ** at 30MHz.***Temperature rise shall not be more than 30ºC
rated current. All specifications subject to change without notice.
714-665-1140
ALLIED COMPONENTS INTERNATIONAL
REVISED 6/18/09
www.alliedcomponents.com