LRC10 Datasheet, PDF (1/1 Pages) Allied Components International – Low Resistance Chip Inductors

LRC10 Low Resistance Chip Inductors
RoHS
0.126±0.012
(3.20±0.30)
0.090±0.008
(2.29±0.20)
0.063±0.008
(1.60±0.20)
0.063±0.008
(1.60±0.20)
0.071±0.008
(1.80±0.20)
0.126±0.012
(3.20±0.30)
0.059
(1.50)
0.039
(0.99)
0.069
(1.75)
Dimensions:
Inches
(mm)
Features
• Miniature SMT wire-wound open
magnetic path construction inductors
with low DCR, high current capacity
and high impedance characteristics.
• Excellent solder heat resistance for
flow and reflow soldering methods.
• Excellent for use as choke coils
in DC/DC converter and DC power
supply circuits.
Electrical
Inductance Range: .12µh to 100µh.
Tolerance: For 20% use M, 10% use K
and 5% use J as part number suffix.
Test Frequency: Inductance measured
at 1MHz on HP4192A.
Operating Temp. Range: i-25° to +85°C.ll
Rated Current: Based on Temperature
rise not to exceed 35ºC. Inductance Drop
10% typical.
Resistance to Soldering Heat: Pre heat:
150ºC ± 10ºC / 1-2 min. Solder temp:
260ºC ± 5ºC for 10 sec. ± 1 sec.
Allied
Part
Number
Inductance Tolerance
(µh)
(%)
LRC10-R12M-RC
.12
20
LRC10-R22M-RC
.22
20
LRC10-R47M-RC
.47
20
LRC10-1R0M-RC
1.0
20
LRC10-2R2M-RC
2.2
20
LRC10-4R7M-RC
4.7
20
LRC10-100K-RC
10
10
LRC10-220K-RC
22
10
LRC10-470K-RC
47
10
Test
Freq.
(MHz)
1
1
1
1
1
1
1
1
1
SRF
Min.
(MHz)
250
250
180
100
50
31
20
14
10
DCR
Max.
(Ω)
Rated
Current
(mA)
.12
970
.15
850
.22
700
.38
510
.55
430
.85
340
1.8
230
4.0
160
10.5
100
Physical
Packaging: 2000 pieces per 7 inch reel.
7500 pieces per 13 inch reel.
LRC10-101K-RC
100
10
1
Available in tighter tolerances.
All specifications subject to change without notice.
7
16.0
80
714-665-1140
ALLIED COMPONENTS INTERNATIONAL
Revised 03-25-08
www.alliedcomponents.com