800Z-GF3065 Datasheet, PDF (4/4 Pages) Allen-Bradley – Zero-Force Touch Buttons

Approximate Dimensions—mm (inches)
48.3
(1.90)
69.9 (2.75)
22mm
Version
Micro Quick
Disconnect
Two-Hand Control Devices
Zero-Force Touch Buttons
800Z General Purpose
40.9
(1.61)
35.1
(1.38)
129.3 (5.09)
56.9
(2.24)
30mm
Version
Mini Quick
Disconnect
40.9
(1.61)
39.4
(1.55)
22mm
Version
Cable
40.9
(1.61)
22.4
(0.88)
110.3
(4.34)
129.3 (5.09)
30mm
Version
Cable
40.9
(1.61)
22.4
(0.88)
General Purpose
General Purpose with Guards
Typical Wiring Diagram
Electrical Connections: 10...40V DC and 20...30V AC Input Voltage (Relay Output); 85...264V AC Input Voltage (Relay Output)
Note: Separate N.O. and N.C. output relays with shared common.
Brown (+) L1
Blue (-) L2
Black (N.O.)
White (N.C.)
Gray (Common)
5 Conductor Cabled (Relay Output) for 800Z-GL_ _ _
Electrical Connections: 10...30V DC Input Voltage (Transistor Output); 150mA max. per circuit output
(+)
(-)
Brown (+) Blue (-)
Load _{Black (N.O.)}
White (N.C.)
Load
4 Conductor Cabled Sinking (NPN)
(+)
(-)
Brown (+) Blue (-)
Black (N.O.) ^Load
White (N.C.)
Load
4 Conductor Cabled Sourcing (NPN)
Applications Details
LED Blink Rate
** ** **
*** *** ***
Diagnostic
Power Up
Noise Detection
**** **** ****
Margin Detection
Description
Device touched during power-up. Device will resume 10 seconds after removal of hand.
Device detected an unacceptable level of noise (>20V/m). Device will resume once noise
subsides.
A conductive film is building up on the sensing surface. Device will resume once cleared.
11-5