|
700-SF Datasheet, PDF (3/4 Pages) Allen-Bradley – Solid-State Relays | |||
|
◁ |
Bulletin 700-SF
Solid-State Relays
Specifications
Control/Input Ratings
Cat. No.
Rated
Control
Voltage
Operating
Control Voltage Range
Impedance
Control Voltage Levels
Pick-up Voltage
Drop-out
Voltage
700-SFZY3Z25
5â¦24V DC
4â¦28V DC
15 mA max. â
4V DC max.
1V DC min.
700-SFTY3Z24
24V DC
19.2â¦28.8V DC
2 k⦠± 20%
19.2V DC max.
1V DC min.
700-SFNY3Z25
5â¦24V DC
4â¦28V DC
1.5 k⦠+ 20%/â10% â
4V DC max.
1V DC min.
Load/Output Ratings
Applicable Load
Cat. No.
Rated Load
Voltage
Load Voltage
Range
Continuous Load
Current (Resistive)
Max. Inrush
Current â
â
â
â
Min.
Max.â
â
700-SFZY3Z25
700-SFTY3Z24
100â¦240V AC
75â¦264V AC
0.1 A
0.1 A
3A
45 A @50/60 Hz, 1 cycle
3A
700-SFNY3Z25
4â¦48V DC
3â¦52.8V DC
0.1 A
3A
18 A (10 ms)
Characteristics
Cat. No.
700-SFZY3Z25
700-SFTY32...
700-SFNY3Z25
Load Switching Method/Device
Triac
Transistor
Pick-up time
1/2 cycle of load power source +
1 ms max.
1 ms max.
0.5 ms max.
Drop-out time
1/2 of output switching element cycle of load power source + 1 ms max.
2 ms max.
Output ON voltage drop
1.6V (RMS) max.
1.5V max.
Output Leakage current
5 mA max. (at 100V AC);
10 mA max. (at 200V AC)
2.5 mA max. (at 100V AC);
5 mA max. (at 200V AC)
5 mA max. (at 50V DC)
Output VDRM VCEO (V)
600
600
80
Output di/dt (A/uS)
50
50
â
Output dv/dt (V/uS)
250
250
â
Output I2t (A2S)
18
18
â
Output Tj (°C) (max.)
125
125
150
Insulation resistance
100 M⦠min. (at 500V DC)
Dielectric strength
1,500V AC, 50/60 Hz for 1 min.
Vibration resistance (max.)
10â¦55 Hz, 1.5 mm double amplitude (10 G)
Shock resistance (max.)
1,000 m/s2 (100 G)
Ambient
temperature
Operating: â30â¦80°C (â22â¦176°F) with no icing or condensation
Storage: â30â¦100°C (â22â¦212°F) with no icing or condensation
Ambient humidity
45â¦85% (no condensation)
Standards
UL508, CSA C22.2, CE
Weight
Approx. 50 g
â With constant current input circuit system, SSR impedance varies with a change in input voltage.
â Input impedance reaches its maximum at the operating voltage.
â If the SSR operation is continuous ON/OFF, this value should be reduced by 50%. Refer to the âInrush Current Resistivityâ graphs on page 50 for more details.
â Refer to "Load Current vs. Ambient Temperature Characteristics" on page 50 for additional load current details.
49
|
▷ |