MSR5T_1 Datasheet, PDF (1/2 Pages) Allen-Bradley – Power Supply Unit

Safety Relays
Power Supply Unit
Description
The Minotaur power supply converts either 110V AC or 230V AC to
24V DC. It is intended to be used with an MSR5T or a Ferrotek
noncontact interlock.
The power supply can be connected to an MSR5T and used to
interface to 110V AC or 230V AC emergency stop and gate interlock
control signals.
The power supply can be used to power 3 Ferrotek control units and
one MSR5T for noncontact interlock protection.
Features
• 110V AC or 230V AC input
• 24V DC output
• <4VA power consumption
• 22.5mm wide housing
Specifications
Standards
Approvals
Power Supply
Power Consumption
Fuses Input (external)
Outputs
Indication LEDs
Impulse Withstand Voltage
Installation Group
Pollution Degree
Operating Temperature
Humidity
Enclosure Protection
Terminal Protection
Conductor Size
Torque Settings—terminal
screws
Case Material
Mounting
Weight
Vibration
Shock
IEC/EN 60204-1
CE marked for all applicable
directives and cULus
110V AC and 230V AC 50/50Hz
<4W
500mA time lag
500mA@ 24V DC
Red = Power on
3000V
C in accordance with VDE 0110
3
-10°C to +55°C (+14°F to +131°F)
90% RH
IP40, (NEMA 1), DIN 0470
IP20, DIN 0470
1 x 2.5mm² (14AWG) stranded
1 x 4mm² (12AWG) solid
1N⋅m (8.85lb⋅in)
Red Polycarbonate
35mm DIN rail
210g (0.46lbs)
0.75mm (0.30in) peak, 10-55Hz
30g, 11ms half sine
4-8