MSR230P Datasheet, PDF (1/2 Pages) Allen-Bradley – Modular Monitoring Safety Relays

Safety Relays
Modular Monitoring Safety Relays
Minotaur MSR230P
Description
The MSR230P is an output expansion module for the modular
Minotaur MSR200 family of monitoring safety relays. It can be
connected to either the MSR210P or MSR211P base unit to provide
additional outputs.
Up to 2 MSR230P output modules can be connected to one base
unit by simply removing the terminator, included with each base
unit, and connecting the ribbon cables of the neighboring module.
The connecting ribbon cable provides power to the MSR230P as
well as a check on its status. The terminators must be inserted into
the final output module.
The MSR230P has four safety rated outputs that work in parallel
with the safety outputs of the base unit. When the output of the base
unit is activated, the outputs of the MSR230P are also activated.
The outputs are 4 normally open safety rated outputs. The safety
outputs have independent and redundant internal contacts to help
ensure the safety function.
Features
• 4 N.O. safety outputs
• 2 Diagnostic LEDs
• Removable terminals
Specifications
Standards
EN 954-1, ISO 13849-1, IEC/EN
60204-1, IEC 60947-4-1, IEC
60947-5-1, ANSI B11.19, AS4024.1
Approvals
C-Tick, CE marked for all
applicable directives, cULus, & TÜV
Category
Cat. 4 per EN954-1 (ISO13849-1)
Power Supply
24V DC from the base unit
Power Consumption
1.5W
Fuses Output (external)
6A Slow Blow or 10A Quick Blow
Outputs
4 N.O. Safety
Output Utilization per
IEC60947-4-1 (Resistive)
AC-1: 6A/250V AC
DC-1: 6A/24V DC
➊ Output Utilization per IEC
60947-5-1 (Inductive)
B300, AC-15
3A/250V AC, 3A/125VAC
P300, DC-13
2.5A/24V DC
Thermal Current (non switching) 1x6A, 2x4A
Output, Solid State
20mA @ 30V DC
Min. Switched Current/Voltage 10ma/10V DC
Contact Material
AgSnO₂ + 2µAu
Response Time
Does not add additional response
time to base module
Indication LEDs
Green = CH1 Output Active
Green = CH2 Output Active
Impulse Withstand Voltage
2500V
Pollution Degree
2
Operating Temperature
-5°C to +55°C (+23°F to 131°F)
Humidity
90% RH
Enclosure Protection
IP40 (NEMA 1)
Terminal Protection
IP20
Conductor Size
0.2–4mm² (24–12 AWG)
Torque Settings—term. screws 0.4–0.5 Nm (3.54–4.43lb•in)
Case Material
Polyamide PA 6.6
Mounting
35mm DIN rail
Weight
215g (0.47lbs)
Electrical Life
222V AC/4A/880VA cosϕ=0.35
220V AC/1.7A/375VA cosϕ=0.6
30V DC/2A/60W
10V DC/0.01A/0.1W
100,000 operations
500,000 operations
1,000,000 operations
2,000,000 operations
Mechanical Life
2,000,000 cycles
Vibration
10-55 Hz, 0.35mm
Shock
10g, 16ms, 100 shocks
➊ See Output Ratings on page 1-29 for details. Consult factory for ratings not
shown.
4-80