MSR220P Datasheet, PDF (1/2 Pages) Allen-Bradley – Modular Monitoring Safety Relays

Safety Relays
Modular Monitoring Safety Relays
Minotaur MSR220P
Specifications
Standards
Description
The MSR220P is an input expansion module for the modular
Minotaur MSR200 family of monitoring safety relays. It can be
connected to either the MSR210P or MSR211P to provide
additional inputs.
Up to 10 input modules can be connected to a base unit by simply
removing the terminator, included with each base unit, and
connecting the ribbon cables of the neighboring module. The
connecting ribbon cable provides power to the MSR220P as well as
a check on its status. The terminators must be inserted into the final
output module. The input modules to a base unit can be either
MSR220P or MSR221P in any combination or order.
The MSR220P has two independent inputs, which can be wired in
one of five ways: 1N.C., 2 N.C., 3 N.C., 1 N.C. and 1 N.O. or a safety
mat. When used with the MSR210 base unit, the inputs to the
MSR220 are continuously pulse-checked for shorts to power,
ground and across inputs. Connecting a single device (must be at
least dual channel) to each input meets the requirements of category
4 per EN594-1.
Four LEDs provide status information on the inputs. Green
indicates the input is closed and red indicates the input is open.
Features
• Category 4 per EN 954-1
• Stop category 0
• 17.5mm DIN rail housing
• 2 Input circuits: gate, e-stop or safety Mat
• 4 Diagnostic LEDs
• Removable terminals
Approvals
Category
Power Supply
Power Consumption
Safety Inputs
Input Simultaneity
Maximum Input Resistance
Indication LEDs
Impulse Withstand Voltage
Pollution Degree
Operating Temperature
Humidity
Enclosure Protection
Terminal Protection
Conductor Size
Torque Settings—terminal
screws
Case Material
Mounting
Weight
Vibration
Shock
EN 954-1, ISO 13849-1, IEC/EN
60204-1, IEC 60947-4-1, IEC
60947-5-1, ANSI B11.19, AS4024.1
C-Tick, CE marked for all
applicable directives, cULus and BG
Cat. 4 per EN954-1 (ISO13849-1)
24V DC from the base unit
2W
1 N.C., 2 N.C., or 3 N.C. 1 N.C.
and 1 N.O. or Mat
Infinite
1300ohms
Green = Input 1 Closed
Red = Input 1 Open
Green = Input 2 Closed
Red = Input 2 Open
2500V
2
-5°C to +55°C (+23°F to 131°F)
90%RH
IP40 (NEMA 1)
IP20
0.2–4mm² (24–12 AWG)
0.4–0.5 Nm (3.54–4.43lb•in)
Polyamide PA 6.6
35mm DIN rail
95g (0.21lbs)
10-55 Hz, 0.35mm
10g, 16ms, 100 shocks
4-76