MSR125H Datasheet, PDF (1/2 Pages) Allen-Bradley – Two Hand Relays

Safety Relays
Two Hand Relays
Minotaur MSR125H/HP
Description
The Allen-Bradley Guardmaster Minotaur MSR125H/HP is a logic
unit for monitoring and interfacing two hand control devices with a
safety related circuit. The MSR125H/HP is for use with mechanical
switches and the Allen-Bradley Bulletin 800Z Zero-Force Touch
Buttons.
The MSR125H/HP has 2 N.O. safety outputs. The safety outputs
have independent and redundant internal contacts to help ensure the
safety function.
The MSR125H/HP requires the two switches to be operated within
0.5 seconds of each other and will only authorize the ON state while
both switches are held down. If one of the switches is released, the
output goes to the OFF state and the machine cannot be restarted
until both buttons are released and then operated simultaneously.
The MSR125H/HP conforms to EN574 Category IIIC, which gives
specific requirements for two hand control units and logic devices.
The MSR125H has fixed terminals and the MSR125HP has
removable terminals.
Features
• Category 4 per EN 954-1
• Safety category IIIc per EN 574
• Two-hand control unit
• 2 N.O. safety outputs
• Removable terminals
• 22.5mm wide housing
Specifications
Standards
EN 574, EN 954-1, ISO 13849-1,
IEC/EN 60204-1, IEC 60947-4-1,
IEC 60947-5-1, ANSI B11.19,
AS4024.1
Category
Cat. 4 per EN 954-1 (ISO 13849-1)
Cat. IIIC per EN 574
Approvals
C-Tick, CE marked for all
applicable directives, cULus & BG
Power Supply
24V DC, 115V AC or 230V AC
Power Consumption
2W
Safety Inputs
1 N.C. and 1 N.O.
Input Simultaneity
<0.5s
Maximum Input Resistance
40 ohms
Reset
Automatic
Outputs
2 N.O. Safety
Output Utilization per IEC
60947-4-1 (Resistive)
➊ Output Utilization per IEC
60947-5-1 (Inductive)
AC-1: 6A/250V AC
DC-1: 6A/24V DC
B300, AC-15
6A/250V AC, 6A/125V AC
P300, DC-13; 3A/24V DC
6A/24V DC @ 6 ops/min
Thermal Current (non switching) 1x6A, 2 x 4A
Fuses Output (external)
6A slow blow or 10A quick blow
Min. Switched Current/Voltage 10mA/10V
Power On Delay
1s
Response
20ms
Recovery Time
500ms
Indication LEDs
Green = Power on
Green = CH1 Output Active
Green = CH2 Output Active
Impulse Withstand Voltage
2500V
Operating Temperature
-5°C to +55°C (+23° to +131°F)
Humidity
90% RH
Enclosure Protection
IP40 (NEMA 1), DIN 0470
Terminal Protection
IP20, DIN 0470
Conductor Size
0.2-4mm² (24-12AWG)
Installation Group
C in accordance with VDE 0110
Pollution Degree
2
Torque Settings—term. screws 0.4-0.5N·m (3.54-4.43lb•in)
Case Material
Polyamide PA 6.6
Mounting
35mm DIN rail
Weight 24V DC
115 and 230V AC
210g (0.463 lbs)
260g (0.573 lbs)
Electrical Life (w/Surge Supp.)
250V AC/6A/1500VA cosϕ=1
250V AC/2.5A/625VA cosϕ=1
250V AC/1.5A/375VA cosϕ=0.35
250V AC/5A/1250VA cosϕ=0.6
24V DC/2A/48W
10V DC/0.01A/0.1W
100,000 operations
500,000 operations
300,000 operations
100,000 operations
1,000,000 operations
2,000,000 operations
Mechanical Life
2,000,000 operations
Vibration
0-55Hz 0.35mm
Shock
10g, 16ms, 100 shocks
➊ See Output Ratings on page 1-29 for details. Consult factory for ratings not
shown.
4-54