800Z-HL1 Datasheet, PDF (1/5 Pages) Allen-Bradley – Zero-Force Touch Buttons

Two-Hand Control Devices
Zero-Force Touch Buttons
800Z Heavy Industrial
Description
The heavy industrial Bulletin 800Z Zero-Force Touch Buttons are
designed for use by machine control systems requiring the use of
two hands. An interlinked sensor surface weaves two capacitive
sensors in offset planes for superior product sensitivity.
The 800Z touch buttons are ergonomically designed to require for
ease of operation. No force is required to operate the switch; simply
touching the surface of the switch will initiate an output. The 800Z
can detect the hand though most industrial gloves.
The contour of the 800Z touch buttons serves two purposes; it
easily conforms to the shape of the hand while helping prevent
defeatability when two-hand control is needed.
Two bi-coloured diagnostic LEDs provide guidance during
operation. The power/fault LED blinks at different rates to provide
diagnostic information to the user. The 800Z detects the presence of
a hand during power-up, noise, and conductive film build-up over
time.
Features
• Zero Force to operate
• Ergonomic design
• EMC protection
• Diagnostic LEDs
• Replaceable Relays
Specifications
Standards
EN574, EN954-1, IEC/EN60947-5-1,
IEC/EN60204-1
Approvals
cULus, C-Tick, and CE marked for all
applicable directives
Power Supply
10-40V DC, 20-30V AC, or 85-264V AC
Power Consumption
1.44W, 19.2VA
Output Ratings
See Load Life Curves
Min. Switched Current/
8mA/5V DC
Voltage
Pollution Degree
2
Operating Temperature
-25°C to +55°C (-13° to +131°F)
Humidity
95% RH
Enclosure Protection
IP66 (NEMA 4/13)
Material
Housing/Guard Valox^ 357
Gaskets 3.2mm (1/16in) Cork-BUNA-N
Mounting
Any position
Conductor Size
0.5-4mm² (#12-22AWG)
Terminal Protection
IP2X
Electrical Life
EM-Relay inductive load See Load Life Curves
Vibration
1.5mm (0.06in) 10-55Hz
Shock
100g,11ms half-sine
Load Life Curves for Heavy Industrial
Relay Output—Maximum Load Breaking Capacity
50
10
8
5
3
DC Inductive Load
1
L/R = 7ms
0.5
0.3
AC Resistive Load
AC
Inductive
Load
(pf=0.4)
DC
Resistive
Load
0.1
0
3 5 10 30 50 100 300 500 1,000
Rated Operating Voltage (V)
Relay Output—Electrical Endurance
5000
3000
1000
500
300
250V AC Resistive Load
30V DC Resistive Load
100
50 25V AC Inductive
30 ^{Load (pf=0.4)}
30V DC
Inductive Load L/R=7ms
10
0 1 2 3 4 5 6 7 8 9 10 11
Rated Operating Current (A)
11-6