3054 Datasheet, PDF (9/12 Pages) Allegro MicroSystems – MULTIPLEXED TWO-WIRE HALL-EFFECT SENSOR ICs

3054
MULTIPLEXED
TWO-WIRE
HALL-EFFECT SENSOR ICs
Dimensions in Inches
(controlling dimensions)
0.183
0.178
0.063
0.059
Dimensions in Millimeters
(for reference only)
4.65
4.52
1.60
1.50
0.181
0.176
0.086 1
2
3
MAX
0.600
0.560
SEE NOTE
0.016
4.60
4.47
45°
0.018
2.18 1
2
3
MAX
0.015
15.24
14.23
SEE NOTE
0.41
45°
0.46
0.38
0.050
0.100
Dwg. MH-003D in
1.27
2.54
Dwg. MH-003D mm
NOTES: 1. Tolerances on package height and width represent allowable mold offsets.
Dimensions given are measured at the widest point (parting line).
2. Exact body and lead configuration at vendor’s option within limits shown.
3. Height does not include mold gate flash.
4. Recommended minimum PWB hole diameter to clear transition area is
0.035” (0.89 mm).
5. Where no tolerance is specified, dimension is nominal.
6. Minimum lead length was 0.500” (12.70 mm). If existing product to the
original specifications is not acceptable, contact sales office before
ordering.