2936-120 Datasheet, PDF (9/10 Pages) Allegro MicroSystems – 3-PHASE BRUSHLESS DC MOTOR CONTROLLER/DRIVER

2936-120
3-PHASE BRUSHLESS
DC MOTOR
CONTROLLER/DRIVER
Dimensions in Millimeters
(for reference only)
32.00
31.49
0.51
19.69
19.45
4.57
MAX
6.22
5.71
3.94
3.68
ø
3.56
14.48
9.27 _13.71
1.40
1.14
3.43
2.54
INDEX
AREA
1.65 ¹
0.89
0.76
0.51
7.36 MIN
12
2.54
±0.254
0.59
0.45
2.03
1.77
Dwg. MP-007 mm
The products described here are manufactured
under one or more U.S. patents or U.S. patents
pending.
Allegro MicroSystems, Inc. reserves the right to
make, from time to time, such departures from the detail
specifications as may be required to permit improve-
ments in the performance, reliability, or
manufacturability of its products. Before placing an
order, the user is cautioned to verify that the informa-
tion being relied upon is current.
Allegro products are not authorized for use as
critical components in life-support devices or systems
without express written approval.
The information included herein is believed to be
accurate and reliable. However, Allegro
MicroSystems, Inc. assumes no responsibility for its
use; nor for any infringement of patents or other rights
of third parties which may result from its use.
NOTES: 1. Lead thickness is measured at seating plane or below.
2. Lead spacing tolerance is non-cumulative
3. Exact body and lead configuration at vendor’s option
within limits shown.
4. Lead gauge plane is 0.762 mm below seating plane.
5. Supplied in standard sticks/tubes of 15 devices.
www.allegromicro.com