3046 Datasheet, PDF (8/8 Pages) Allegro MicroSystems – HALL EFFECT GEAR-TOOTH SENSORS ZERO SPEED

3046, 3056, AND 3058
HALL EFFECT
GEAR-TOOTH SENSORS
–ZERO SPEED
Dimensions in Inches
(controlling dimensions)
0.183
0.178
0.063
0.059
Dimensions in Millimeters
(for reference only)
4.65
4.52
1.60
1.50
0.181
0.176
0.086 1
2
3
MAX
0.600
0.560
SEE NOTE
0.0189
0.0142
4.60
4.47
45°
0.018
2.18 1
2
3
MAX
0.0173
0.0138
15.24
14.23
SEE NOTE
0.48
0.36
45°
0.46
0.44
0.35
0.050
0.100
Dwg. MH-003E in
The products described herein are manufactured under one or
more of the following U.S. patents: 5,045,920; 5,264,783; 5,442,283;
5,389,889; 5,581,179; 5,517,112; 5,619,137; 5,621,319; 5,650,719;
5,686,894; 5,694,038; 5,729,130; 5,917,320; and other patents
pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to
time, such departures from the detail specifications as may be
required to permit improvements in the performance, reliability, or
manufacturability of its products. Before placing an order, the user is
cautioned to verify that the information being relied upon is current.
Allegro products are not authorized for use as critical components
in life-support appliances, devices, or systems without express written
approval.
The information included herein is believed to be accurate and
reliable. However, Allegro MicroSystems, Inc. assumes no responsi-
bility for its use; nor for any infringements of patents or other rights of
third parties that may result from its use.
1.27
2.54
Dwg. MH-003E mm
NOTES:1. Tolerances on package height and width represent
allowable mold offsets. Dimensions given are
measured at the widest point (parting line).
2. Exact body and lead configuration at vendor’s option
within limits shown.
3. Height does not include mold gate flash.
4. Recommended minimum PWB hole diameter to
clear transition area is 0.035” (0.89 mm).
5. Where no tolerance is specified, dimension is
nominal.
6. Minimum lead length was 0.500” (12.70 mm). If
existing product to the original specifications is not
acceptable, contact sales office before ordering.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 [phone]