SI-3025ZD Datasheet, PDF (7/9 Pages) Allegro MicroSystems – High-Current, Low-Dropout, 2.5 V Regulator

LRinegeuarlators
Tape and Reel Dimensions in Millimeters
SI-3025ZD
High-Current,
Low-Dropout,
2.5 V Regulator
Tape Specifications
1. Material: conductive polystyrene.
2. Allowable camber: 1 mm/100 mm maximum.
3. A0 (10.6 mm) and B0 (15.7 mm) measured on a plane
0.3 mm above the bottom of the pocket.
4. K0 (4.9 mm) is measured from a plane on the inside
bottom of the pocket to the surface of the carrier.
5. Ten pitches cumulative tolerance on tape ±0.2 mm.
6. The space between parts and cavity must not exceed
±0.3 mm from its normal position in any direction.
7. Surface resistivity of embossment: 10⁷ ohm/cm² max.
8. K1 = 3.9 mm.
www.allegromicro.com
7