5713 Datasheet, PDF (4/4 Pages) Allegro MicroSystems – DUAL PERIPHERAL AND POWER DRIVER TRANSIENT PROTECTED OUTPUTS

5713
DUAL PERIPHERAL AND POWER DRIVER
8
0.280
0.240
Dimensions in Inches
5
0.014
0.008
0.430
MAX
0.300
BSC
1
0.070
0.045
0.210
MAX
4
0.400
0.355
0.005
MIN
0.015
MIN
0.022
0.014
0.100
BSC
0.150
0.115
Dimensions in Millimeters
(Based on 1” = 25.4 mm) _0.355
0.204
8
5
7.11
6.10
Dwg. MA-001-8A in
10.92
MAX
7.62
BSC
1
1.77
1.15
5.33
MAX
4
10.16
9.02
0.13
MIN
0.39
MIN
0.558
0.356
2.54
BSC
3.81
2.93
Dwg. MA-001-8A mm
Allegro MicroSystems, Inc. reserves the right to make, from time to time,
such departures from the detail specifications as may be required to permit
improvements in the design of its products.
NOTES: 1. Lead thickness is measured at seating plane or below.
The information included herein is believed to be accurate and reliable.
2. Lead spacing tolerance is non-cumulative.
However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor
3. Exact body and lead configuration at vendor’s option _{for any infringements of patents or other rights of third parties which may result}
within limits shown.
from its use.
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 [phone]