English
Language : 

A8293SESTR-T Datasheet, PDF (2/19 Pages) Allegro MicroSystems – Single LNB Supply and Control Voltage Regulator
A8293
Single LNB Supply and Control Voltage Regulator
Description (continued)
A comprehensive set of fault registers are provided, which comply
with all the common standards, including: overcurrent, thermal
shutdown, undervoltage, and power not good.
The device uses a 2-wire bidirectional serial interface, compatible
with the I2C™ standard, that operates up to 400 kHz.
The A8293 is supplied in two lead (Pb) free MLP/QFN packages:
ES, 20-contact, 4 mm × 4 mm, 0.75 nominal overall height, and
ET, 28-contact, 5 mm × 5 mm, 0.90 nominal overall height.
Selection Guide
Part Number
Packing1
Description
A8293SESTR-T2
7 in. reel, 1500 pieces/reel
12 mm carrier tape
ES package, MLP/QFN surface mount
4 mm × 4 mm × 0.75 mm nominal height
A8293SETTR-T2,3
7 in. reel, 1500 pieces/reel
12 mm carrier tape
ET package, MLP/QFN surface mount
5 mm × 5 mm × 0.90 mm nominal height
1Contact Allegro for additional packing options.
2Leadframe plating 100% matte tin.
3This variant is in production but has been determined to be NOT FOR NEW DESIGN. This classification indicates that sale
of this device is currently restricted to existing customer applications. The variant should not be purchased for new design ap-
plications because obsolescence in the near future is probable. Status date change September 21, 2010.
Absolute Maximum Ratings
Characteristic
Symbol
Conditions
Rating
Units
Load Supply Voltage, VIN pin
VIN
Output Current1
IOUT
30
V
Internally
Limited
A
Output Voltage, BOOST pin
–0.3 to 33
V
Output Voltage, LNB pin
Surge2
–1 to 33
V
Output Voltage, LX pin
–0.3 to 30
V
Output Voltage, VCP pin
VCP
Logic Input Voltage, EXTM pin
–0.3 to 41
V
–0.3 to 5
V
Logic Input Voltage, other pins
–0.3 to 7
V
Logic Output Voltage
–0.3 to 7
V
Operating Ambient Temperature
TA
–20 to 85
°C
Junction Temperature
TJ(max)
150
°C
Storage Temperature
Tstg
–55 to 150
°C
1Output current rating may be limited by duty cycle, ambient temperature, and heat sinking. Under any set of conditions, do not exceed the speci-
fied current ratings, or a junction temperature, TJ, of 150°C.
2Use Allegro recommended Application circuit.
Package Thermal Characteristics*
Package
RθJA
(°C/W)
PCB
ES
37 (estimated)
4-layer
ET
32
4-layer
* Additional information is available on the Allegro website.
Allegro MicroSystems, LLC
2
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com