A1321_06 Datasheet, PDF (2/11 Pages) Allegro MicroSystems – Ratiometric Linear Hall Effect Sensor for High-Temperature Operation

A1321, A1322,
and A1323
Ratiometric Linear Hall Effect Sensor
for High-Temperature Operation
Description (continued)
recoverability after temperature cycling. Having the Hall element
and an amplifier on a single chip minimizes many problems normally
associated with low-level analog signals.
Output precision is obtained by internal gain and offset trim adjustments
made at end-of-line during the manufacturing process.
The A132X family is provided in a 3-pin single in-line package
(UA) and a 3-pin surface mount package (LH). Each package is
available in a lead (Pb) free version (suffix, –T) , with a 100% matte
tin plated leadframe.
Selection Guide
Part Number
Pb-free¹
Packing²
Mounting
Ambient, T_A
(ºC)
Sensitivity,
Typ. (mV/G)
A1321ELHLT-T
A1321EUA-T
A1321LLHLT-T
A1321LUA-T
Yes
7-in. reel, 3000 pieces/reel
Surface Mount
Yes
Bulk, 500 pieces/bag
SIP through hole
Yes
7-in. reel, 3000 pieces/reel
Surface Mount
Yes
Bulk, 500 pieces/bag
SIP through hole
–40 to 85
–40 to 150
5.000
A1322ELHLT-T
A1322EUA-T
A1322LLHLT-T
A1322LUA-T
Yes
7-in. reel, 3000 pieces/reel
Surface Mount
Yes
Bulk, 500 pieces/bag
SIP through hole
Yes
7-in. reel, 3000 pieces/reel
Surface Mount
Yes
Bulk, 500 pieces/bag
SIP through hole
–40 to 85
–40 to 150
3.125
A1323ELHLT-T
A1323EUA-T
A1323LLHLT-T
A1323LUA-T
Yes
7-in. reel, 3000 pieces/reel
Surface Mount
Yes
Bulk, 500 pieces/bag
SIP through hole
Yes
7-in. reel, 3000 pieces/reel
Surface Mount
Yes
Bulk, 500 pieces/bag
SIP through hole
–40 to 85
–40 to 150
2.500
1_{Pb-based variants are being phased out of the product line.}
a. Certain variants cited in this footnote are in production but have been determined to be LAST TIME BUY. This classification indicates that sale of this device is
currently restricted to existing customer applications. The device should not be purchased for new design applications because obsolescence in the near future is
probable. Samples are no longer available. Status change: October 31, 2006. Deadlilne for receipt of LAST TIME BUY ORDERS: April 27, 2007. These variants
include: A1322ELHLT, A1322EUA, and A1323LLHLT.
b. Certain variants cited in this footnote are in production but have been determined to be NOT FOR NEW DESIGN. This classification indicates that sale of this
device is currently restricted to existing customer applications. The device should not be purchased for new design applications because obsolescence in the near
future is probable. Samples are no longer available. Status change: May 1, 2006. These variants include: A1321ELHLT, A1321EUA, A1321LLHLT, A1321LUA,
A1322LLHLT, A1322LUA, A1323ELHLT, A1323EUA, and A1323LUA.
2_{Contact Allegro for additional packing options.}
Absolute Maximum Ratings
Characteristic
Supply Voltage
Output Voltage
Reverse Supply Voltage
Reverse Supply Voltage
Output Sink Current
Operating Ambient Temperature
Maximum Junction Temperature
Storage Temperature
Symbol
V_CC
V_OUT
V_RCC
V_RCC
I_OUT
T_A
T_J(max)
T_stg
Notes
*_{Additional current draw may be observed at}
voltages above the minimum supply Zener
clamp voltage, V_Z(min), due to the Zener diode
turning on.
Range E
Range L
Rating
8
8
–0.1
–0.1
10
–40 to 85
–40 to 150
165
–65 to 170
Units
V
V
V
V
mA
ºC
ºC
ºC
ºC
Allegro MicroSystems, Inc.
2
115 Northeast Cutoff, Box 15036
Worcester, Massachusetts 01615-0036 [phone]
www.allegromicro.com