A1190LUA-T Datasheet, PDF (17/18 Pages) Allegro MicroSystems – Programmable, Chopper-Stabilized, Two Wire Hall-Effect Switches

A1190, A1192,
and A1193
Programmable, Chopper-Stabilized,
Two Wire Hall-Effect Switches
Package UA, 3-Pin SIP
4.09
+0.08
–0.05
45°
B
E 2.05 NOM
3.02
+0.08
–0.05
1.44 NOM
E
1.02
MAX
1
2
3
10°
E
Branded
Face
0.79 REF
A
14.99 ±0.25
0.43
+0.05
–0.07
1.27 NOM
C
1.52 ±0.05
Mold Ejector
Pin Indent
45°
NNN
1
D Standard Branding Reference View
= Supplier emblem
N = Last three digits of device part number
0.41
+0.03
–0.06
For Reference Only; not for tooling use (reference DWG-9065)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
A Dambar removal protrusion (6X)
B Gate and tie bar burr area
C Active Area Depth, 0.50 mm REF
D _{Branding scale and appearance at supplier discretion}
E Hall element (not to scale)
Allegro MicroSystems, LLC
17
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com