A1262 Datasheet, PDF (16/17 Pages) Allegro MicroSystems – 2D, Dual-Channel, Ultrasensitive Hall-Effect Latch

A1262
2D, Dual-Channel, Ultrasensitive Hall-Effect Latch
D
0.11
REF
2.90
+0.10
–0.20
D D2
8X 12°
REF
D D2
PACKAGE OUTLINE DRAWING
For Reference Only – Not for Tooling Use
(Reference DWG-9069)
Dimensions in millimeters – NOT TO SCALE
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
2.98+–00..0182
A
5
D1 D
D3 D
1.91 ^{+–00..0169}
1
D
0.17
REF
2
0.55
REF
D3 D
Branded Face
D D3
0.25 BSC
0.95
BSC
0.20 MIN
1.00 ±0.13
D1 D
0.05+–00..0150
0.40 ±0.10
4° ±4°
0.180+–00..005230
D1 D
D2 D
0.25 MIN
SEATING PLANE
GAUGE PLANE
NNN
2.40
C ^{Standard Branding Reference View}
1.00
0.70
0.95
B ^{PCB Reference Layout View}
A Active Area Depth, 0.28 ±0.04
B ^{Reference land pattern layout; all pads a minimum of 0.20 mm from all adjacent pads;}
adjust as necessary to meet application process requirements and PCB layout tolerances
C Branding Scale and appearance at supplier discretion
D Hall Elements (D1, D2, and D3), not to scale; D2 and D3 are active in the A1262LLH-T;
D1 and D3 are active in the A1262LLH-X-T
Figure 10: Package LH, 5-Pin SOT23-W
Allegro MicroSystems, LLC
16
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com