A3932 Datasheet, PDF (12/12 Pages) Allegro MicroSystems – Three-Phase Power MOSFET Controller

A3932
Three-Phase Power MOSFET Controller
9.70
38
A
12
38X
0.10 C
0.22
0.50
Package LD, 38-Pin TSSOP
1.60
4º
38
0.15
4.40 6.40
0.50
0.30
6.00
C
SEATING
PLANE
1.20 MAX
0.10
0.25
12
SEATING PLANE
GAUGE PLANE
B PCB Layout Reference View
All dimensions nominal, not for tooling use
(reference JEDEC MO-153 BD-1)
Dimensions in millimeters
A Terminal #1 mark area
B _{Reference pad layout (reference IPC SOP50P640X110-38M)}
All pads a minimum of 0.20 mm from all adjacent pads; adjust as necessary
to meet application process requirements and PCB layout tolerances
Copyright ©2002-2008, Allegro MicroSystems, Inc.
The products described here are manufactured under one or more U.S. patents or U.S. patents pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to per-
mit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the
information being relied upon is current.
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website:
www.allegromicro.com
12
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com