A3959SLPTR Datasheet, PDF (11/11 Pages) Allegro MicroSystems – DMOS Full-Bridge PWM Motor Driver

A3959
DMOS Full-Bridge PWM Motor Driver
LP package 28-pin TSSOP
28
A
12
28X
0.10 C
0.25
+0.05
–0.06
9.70 ±0.10
B
5.00
0.65
3.00 4.40 ±0.10 6.40 ±0.20
4° ±4
0.15
+0.05
–0.06
1.65
0.45
28
0.60 ±0.15
(1.00)
0.65
3.00 6.10
C
SEATING
PLANE
1.20 MAX
0.10 MAX
0.25
SEATING PLANE
GAUGE PLANE
12
5.00
C PCB Layout Reference View
For reference only
(reference JEDEC MO-153 AET)
Dimensions in millimeters
Dimensions exclusive of mold flash, gate burrs, and dambar protrusions
Exact case and lead configuration at supplier discretion within limits shown
A Terminal #1 mark area
B Exposed thermal pad (bottom surface)
C Reference land pattern layout (reference IPC7351 SOP65P640X120-29CM);
All pads a minimum of 0.20 mm from all adjacent pads; adjust as necessary
to meet application process requirements and PCB layout tolerances; when
mounting on a multilayer PCB, thermal vias at the exposed thermal pad land
can improve thermal dissipation (reference EIA/JEDEC Standard JESD51-5)
Copyright ©2001-2008, Allegro MicroSystems, Inc.
The products described here are manufactured under one or more U.S. patents or U.S. patents pending.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, such departures from the detail specifications as may be required to per-
mit improvements in the performance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that the
information being relied upon is current.
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
The information included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use;
nor for any infringement of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website:
www.allegromicro.com
Allegro MicroSystems, Inc.
11
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com