ATS672LSB_03 Datasheet, PDF (1/15 Pages) Allegro MicroSystems – Self-Calibrating Gear Tooth Sensor with 9-Bit Signal Capture

ATS672LSB
Self-Calibrating Gear Tooth Sensor with 9-Bit Signal Capture
Discontinued Product
These parts are no longer in production The device should not be
purchased for new design applications. Samples are no longer available.
Date of status change: May 1, 2006
Recommended Substitutions:
NOTE: For detailed information on purchasing options, contact your
local Allegro field applications engineer or sales representative.
Allegro MicroSystems, Inc. reserves the right to make, from time to time, revisions to the anticipated product life cycle plan for a
product to accommodate changes in production capabilities, alternative product availabilities, or market demand. The information
included herein is believed to be accurate and reliable. However, Allegro MicroSystems, Inc. assumes no responsibility for its use; nor
for any infringements of patents or other rights of third parties which may result from its use.