A4952 Datasheet, PDF (1/11 Pages) Allegro MicroSystems – Designed for pulse width modulated (PWM) control of DC motors, the A4952 and A4953 are capable of peak output currents to ±2 A and operating voltages to 40 V.

A4952 and A4953
Full-Bridge DMOS PWM Motor Drivers
Features and Benefits
• Low R_DS(on) outputs
• Overcurrent protection (OCP)
▫ Motor short protection
▫ Motor lead short to ground protection
▫ Motor lead short to battery protection
• Low Power Standby mode
• Adjustable PWM current limit
• Synchronous rectification
• Internal undervoltage lockout (UVLO)
• Crossover-current protection
• Fault output (A4952 only)
• Selectable retry (A4952 only)
Packages:
10-pin MSOP
with exposed thermal pad
(LY package)
Description
Designed for pulse width modulated (PWM) control of DC
motors, the A4952 and A4953 are capable of peak output
currents to ±2 A and operating voltages to 40 V.
Input terminals are provided for use in controlling the speed and
direction of a DC motor with externally applied PWM control
signals. Internal synchronous rectification control circuitry is
provided to lower power dissipation during PWM operation.
Internal circuit protection includes overcurrent protection,
motor lead short to ground or supply, thermal shutdown with
hysteresis, undervoltage monitoring of V_BB, and crossover-
current protection.
The A4952 is provided in a low-profile 10-pin MSOP package
(suffix LY) and the A4953 is provided in a low-profile
8-pin SOICN package (suffix LJ). Both packages have an
exposed thermal pad, and are lead (Pb) free, with 100% matte tin
leadframe plating.
8-pin SOICN
with exposed thermal pad
(LJ package)
Not to scale
Functional Block Diagram
V_INT
A4952 only
RTRY
IN1
IN2
GND
A4952 only
FLTn
VREF
÷ 10
OSC
Charge
Pump
Control
Logic
Disable
TSD
UVLO
7V
Load Supply
VBB
OUT1
OUT2
LSS
(Optional)
A4952-DS, Rev. 2