A4940_16 Datasheet, PDF (1/14 Pages) Allegro MicroSystems – Automotive Full Bridge MOSFET Driver

A4940
Automotive Full Bridge MOSFET Driver
Features and Benefits
▪ High current gate drive for N-channel MOSFET full bridge
▪ Independent control of each MOSFET
▪ Charge pump for low supply voltage operation
▪ Cross-conduction protection with adjustable dead time
▪ 5.5 to 50 V supply voltage range
▪ Diagnostics output
▪ Low current sleep mode
Package: 24-pin TSSOP with exposed
thermal pad (suffix LP)
Not to scale
Description
The A4940 is a full-bridge controller for use with external
N-channel power MOSFETs and is specifically designed for
automotive applications with high-power inductive loads such
as brush DC motors.
A unique charge pump regulator provides full ( >10 V ) gate
drive for battery voltages down to 7 V and allows the A4940
to operate with a reduced gate drive, down to 5.5 V.
A bootstrap capacitor is used to provide the above battery
supply voltage required for N-channel MOSFETs. A unique
bootstrap charge management system ensures that the bootstrap
capacitor is always sufficiently charged to supply the high-side
gate drive circuit.
Each of the power MOSFETs is controlled independently but
all are protected from shoot-through by dead time that is user-
configured by an external resistor.
Integrated diagnostics provide indication of undervoltage and
overtemperature faults.
The A4940 is supplied in a 24-pin TSSOP power package with
an exposed pad for enhanced thermal dissipation (package
type LP). It is lead (Pb) free, with 100% matte tin leadframe
plating (suffix –T).
Typical Application
FAULT
AHI
BHI
ALO
BLO
A4940
VBAT
M
A4940-DS, Rev. 1