A4447_V Datasheet, PDF (1/12 Pages) Allegro MicroSystems – High Voltage Step Down Regulator

A4447
High Voltage Step Down Regulator
Features and Benefits
▪ Wide input voltage range: 8 to 50 V
▪ Integrated low R_DS(on) DMOS switch
▪ 2 A continuous output current
▪ Adjustable fixed off-time
▪ Highly efficient
▪ Adjustable output: 0.8 to 24 V
▪ Small package with exposed thermal pad
Package: 8 pin SOIC with exposed thermal
pad (suffix LJ)
Description
The A4447 is a 2A, high efficiency general-purpose buck
regulator designed for a wide variety of applications. The output
voltage is adjustable from 0.8 to 24 V, based on a resistor divider
and the 0.8 V ± 2 % reference. External components include
an external clamping diode, inductor, and filter capacitor.
The off-time is determined by an external resistor to ground.
It operates in both continuous and discontinuous modes to
maintain light load regulation. An internal blanking circuit is
used to filter out transients due to the reverse recovery of the
external clamp diode. Typical blanking time is 200 ns.
This new device is ideal for various end products including
applications with 8 to 50 V input voltage range and require up
to 2 A output current, such as uninterruptible power supplies,
point of sale (POS) applications, and industrial applications
with 24 or 36 V bus.
Applications include:
▪ Printer power supplies
▪ Office automation equipment
▪ POS thermal, laser, photo, and inkjet printers
▪ Tape drives
▪ Industrial applications
Approximate Scale 1:1
Typical Application
+42 V
CBOOT
0.01 μF
CIN2
BOOT
VIN
ENB
LX
A4447
D1
L1
TSET
RTSET
54 k7
GND
VBIAS
FB
A R3 required when C_BYP connected
R1
2.87 k7
R3 A
10 k7
R2
910 7
C_BYP
0.22 μF
CIN1
0.22 μF
V_OUT
3.3 V
2A
ESR
COUT
220 μF
25 V
Efficiency vs. Output Current
90
5
85
3.3
80
75
1.8
70
1.5
65
VOUT (V)
60
0
500 1000 1500 2000
I_OUT (mA)
A4447-DS, Rev. 2
Data is for reference only. Efficiency data from circuit shown in left panel.