English
Language : 

6275 Datasheet, PDF (1/12 Pages) Allegro MicroSystems – 8-BIT SERIAL-INPUT, CONSTANTCURRENT LATCHED LED DRIVER
6275
8-BIT SERIAL-INPUT, CONSTANT-
CURRENT LATCHED LED DRIVER
A6275ELW
GROUND 1
SERIAL
DATA IN 2
CLOCK 3 CK
LATCH 4 L
ENABLE
OUT 0 5
OUT 1 6
OUT2 7
OUT3 8
VDD
16
LOGIC
SUPPLY
IO
REGULATOR
15 REXT
SERIAL
14 DATA OUT
REGISTER
LATCHES
OE 13 OUTPUT
ENABLE
12 OUT7
11 OUT6
10 OUT5
9 OUT4
Dwg. PP-029-10
Note that the A6275EA (DIP) and the A6275ELW
(SOIC) are electrically identical and share a
common terminal number assignment.
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VDD ...................... 7.0 V
Output Voltage Range,
VO ............................ -0.5 V to +17 V
Output Current, IO ........................ 90 mA
Ground Current, IGND ................. 750 mA
Input Voltage Range,
VI .................... -0.4 V to VDD + 0.4 V
Package Power Dissipation,
PD ..................................... See Graph
Operating Temperature Range,
TA ............................. -40°C to +85°C
Storage Temperature Range,
TS ........................... -55°C to +150°C
Caution: These CMOS devices have input
static protection (Class 2) but are still suscep-
tible to damage if exposed to extremely high
static electrical charges.
The A6275EA and A6275ELW are specifically designed for LED-
display applications. Each BiCMOS device includes an 8-bit CMOS
shift register, accompanying data latches, and eight npn constant-
current sink drivers. Except for package style and allowable package
power dissipation, the two devices are identical.
The CMOS shift register and latches allow direct interfacing with
microprocessor-based systems. With a 5 V logic supply, typical serial
data-input rates are up to 20 MHz. The LED drive current is deter-
mined by the user’s selection of a single resistor. A CMOS serial data
output permits cascade connections in applications requiring additional
drive lines. For inter-digit blanking, all output drivers can be disabled
with an ENABLE input high. Similar 16-bit devices are available as
the A6276EA and A6276ELW.
Two package styles are provided for through-hole DIP (suffix A) or
surface-mount SOIC (suffix LW). Under normal applications, copper
lead frames and low logic-power dissipation allow these devices to
sink maximum rated current through all outputs continuously over the
operating temperature range (90 mA, 0.9 V drop, +85°C). Both
devices are also available for operation over the standard temperature
range of -20°C to +85°C. To order, change the suffix letter ‘E’ to ‘S’.
FEATURES
I To 90 mA Constant-Current Outputs
I Under-Voltage Lockout
I Low-Power CMOS Logic and Latches
I High Data Input Rate
I Pin-Compatible with TB62705CP
Always order by complete part number, e.g., A6275EA .