3962 Datasheet, PDF (1/8 Pages) Allegro MicroSystems – DUAL FULL-BRIDGE PWM MOTOR DRIVER

3962
DUAL FULL-BRIDGE
PWM MOTOR DRIVER
3962
DUAL FULL-BRIDGE PWM MOTOR DRIVER
Designed for pulse-width modulated (PWM) current control of
bipolar stepper motors, the A3962SLB is capable of continuous output
OUT _1B 1
SENSE ₁ 2
OUT _1A 3
T _{LOAD 4}
SUPPLY
C _{GROUND 5}
1
V_BB
U _{GROUND 6}
D _{VREF(IN) 7}
O ^LY RC₁ 89
PHASE ₁ 9 θ1
R ^N _{ENABLE1 10}
20 OUT _2B
2
19 SENSE ₂
18 OUT _2A
V _CC
17
LOGIC
SUPPLY
16 GROUND
15 GROUND
14 V _REF(OUT)
13 RC ₂
θ ₂ 12 PHASE ₂
11 ENABLE ₂
P _{O Dwg. PP-047-1}
ED ^{E B} ABSOLUTE MAXIMUM RATINGS
C _{L Load Supply Voltage, VBB . . . . . . . . . 30 V}
U _{N S Output Current, IOUT . . . . . . . . . . ±800 mA*}
IN ^{E 4 Logic Supply Voltage, VCC . . . . . . . . . 7.0 V}
T ^{R 6 Logic Input Voltage Range,}
V_IN . . . . . . . . . . . -0.3 V to V_CC + 0.3 V
N ^{E 9 Sense Voltage, VSENSE . . . . . . . . . . . . 1.0 V}
3 _{Reference Output Current,}
O ^{F IREF OUT . . . . . . . . . . . . . . . . . . . 1.0 mA}
C ^{E A Package Power Dissipation,}
P_D . . . . . . . . . . . . . . . . . . . . See Graph
IS ^{R e Operating Temperature Range,}
e _{TA . . . . . . . . . . . . . . . . -20˚C to +85˚C}
D ^{R S Junction Temperature, TJ . . . . . . . +150˚Câ€} 
Storage Temperature Range,
T_S . . . . . . . . . . . . . . . -55˚C to +150˚C
FO ^{— * Output current rating may be limited by duty}
currents to ±800 mA and operating voltages to 30 V. Internal fixed
off-time PWM current-control circuitry can be used to regulate the
maximum load current to a desired value. An internal precision voltage
reference is provided to improve motor peak-current control accuracy.
The peak load current limit is set by the user’s selection of an external
resistor divider and current-sensing resistors.
The fixed off-time pulse duration is set by user-selected external
RC timing networks. The capacitor in the RC timing network also
determines a user-selectable blanking window that prevents false
triggering of the PWM current control circuitry during switching transi-
tions. This eliminates the need for two external RC filter networks on
the current-sensing comparator inputs.
For each bridge the PHASE input controls load current polarity by
selecting the appropriate source and sink driver pair. For each bridge
the ENABLE input, when held high, disables the output drivers. Spe-
cial power-up sequencing is not required. Internal circuit protection
includes thermal shutdown with hysteresis, transient-suppression
diodes, and crossover-current protection.
The A3962SLB is supplied in a 20-lead plastic SOIC with copper
heat sink tabs. The power tab is at ground potential and needs no
electrical isolation.
FEATURES
s ±800 mA Continuous Output Current Rating
s 30 V Output Voltage Rating
s Internal PWM Current Control, Saturated Sink Drivers
s Internally Generated Precision 2.5 V Reference
s Internal Transient-Suppression Diodes
s Internal Thermal-Shutdown Circuitry
s Crossover-Current Protection, UVLO Protection
s Automotive Capable
cycle, ambient temperature, and heat sinking.
Under any set of conditions, do not exceed the
specified current rating or a junction tempera
ture of 150˚C.
† Fault conditions that produce excessive junction
temperature will activate the device’s thermal
shutdown circuitry. These conditions can be
tolerated but should be avoided.
Always order by complete part number: A3962SLB .