AKD4730 Datasheet, PDF (8/29 Pages) Asahi Kasei Microsystems – AK4730-100W Evaluation Board Rev.4

ASAHI KASEI
[AKD4730-100W]
„ Attention on the operation
In the case that the function of “Output-Short Protection” is used
Write “1” to PW bit after PROT bit was written “1”.
In the case that the function of “Adaptive Dead-Time Control” is used
Write “1” to ADTC bit after PW bit was written “1”.
If you set up Function1 or Function2 dialog, input data to all boxes. Attention dialog is indicated if you input data or
address that is not specified in the datasheet or you click “OK” button before you input data. In that case set up the dialog
and input data once more again. These operations does not need if you click “Cancel” button or check the check box.
<KM074904>
-8-
2005/07